Martindale RSPD690 Voltage Indicator Proving Unit 700V

  • RS-stocknr. 719-0894
  • Fabrikantnummer RSPD690
  • Fabrikant Martindale
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PH
Productomschrijving

Martindale Proving Units

The Martindale proving unit has an output voltage rating of 700VAC. It is compatible with voltage indicators, including the new VI-15000 and VI13800.

Features and Benefits

Calibrated by RS
Designed for use with Drummond and other similar lower resistance test lamps, having sufficient output to cause illumination
Neon indicates battery condition
Long battery life time with a low battery indicator
Single probe operation allows for non-contact voltage tester proving (access 5mm)
Operates test voltage indicators that have greater than 4kohm internal resistance
Battery of6xLR6/MN1500 1.5V alkaline batteries or equivalent
Operating temperature ranges between -10°C and 40°C

Applications

Digital multimeters
Clamp meters
Electrical testers

Specificaties
Kenmerk Waarde
Output Voltage 700V
Battery Type AA
Power Source Battery
Dimensions 143 x 84 x 50mm
Weight 400g
Height 50mm
Length 143mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -10°C
Model Number p PD690
Width 84mm
61 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
121,00
(excl. BTW)
146,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 121,00
Kalibratie-opties
Related Products
RS Pro VP-3 Volt Stick is a pen ...
Description:
RS Pro VP-3 Volt Stick is a pen style non-contact AC voltage indicator. Safely checks the presence of an AC voltage in cables, wall sockets, fuses and junction boxes. No current flow is needed for correct operation. An essential tool ...
Safely detect the presence of AC voltage in ...
Description:
Safely detect the presence of AC voltage in cables, wires, wall sockets fuses and junction boxes with the RS PRO VP-4. Ergonomically designed for comfort, it features a built in torch for confined spaces, a clip for pockets or tool ...
The NC1 is a non-contact magnetic field tester ...
Description:
The NC1 is a non-contact magnetic field tester for checking the operation of relays and solenoid valves in a wide range of machinery. The NC1 saves time by allowing testing of solenoids without dismantling the equipment or control panel.A bright ...
RS PRO offers an ingenious pocket device voltage ...
Description:
RS PRO offers an ingenious pocket device voltage indicator for determining the presence of 50Hz AC voltages. These voltage indicators are battery powered pen style units with nylon tips that glow red when a voltage is detected.There is no necessity ...