- RS-stocknr.:
- 437-014
- Fabrikantnummer:
- PRDIDC0835
- Fabrikant:
- Elga
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 437-014
- Fabrikantnummer:
- PRDIDC0835
- Fabrikant:
- Elga
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
Replacement Cartridge for ELGA Vison 250 and 125 Water De-Ioniser
The ELGA Vision250 replacement cartridge has a maximum flow rate of 60L/h. This cartridge is capable of taking mains pressure. It is useful when an in-line supply of pure water is needed. It uses disposable cartridges with colour change exhaustion windows.
Note:
Please note that Vision 250 and 125 Water De-Ioniser cartridges are non-recyclable and must be disposed of after use.
Note:
Please note that Vision 250 and 125 Water De-Ioniser cartridges are non-recyclable and must be disposed of after use.
Features and Benefits
Ideal for use where no regeneration or electrical supply is available
Colour change windows indicate two resin exhaustion levels to enable users to monitor capacity status and cartridge replacement requirements
Optional 6m coiled delivery line and trigger applicator
Wall mount
Height of 600mm, a width of 92mm and depth of 110mm
Maximum input pressure is 6bar (90 psi)
Connection via 1/2 BSP/hosetail
Weight is 4.2kg
Colour change windows indicate two resin exhaustion levels to enable users to monitor capacity status and cartridge replacement requirements
Optional 6m coiled delivery line and trigger applicator
Wall mount
Height of 600mm, a width of 92mm and depth of 110mm
Maximum input pressure is 6bar (90 psi)
Connection via 1/2 BSP/hosetail
Weight is 4.2kg
Specificaties
Kenmerk | Waarde |
|---|---|
| Manufacturer Series | Vision 250 |
| Maximum Flow Rate | 60L/h |