RS PRO Steel RH 30mm Long Worm Gear, 1 Start , 15.6mm Diam , 14mm Pitch Diam. , 20° Pressure Angle

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Metric Worm Gears & Pinion Gears - Steel & Bronze

Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure correct assembly.

Features and Benefits

Worm gear manufactured from steel (pinion gears from phosphor bronze each sold separately) Worm gears are secured onto a shaft using a M4 grub screw (supplied)
H7 pilot bore tolerance
Right-hand gear direction

Note

Worm gears and pinions should be ordered separately.

Specificaties
Kenmerk Waarde
Module 0.8
Material Steel
Gear Direction RH
Number of Starts 1
Overall Length 30mm
Overall Diameter 15.6mm
Pitch Diameter 14mm
Pressure Angle 20°
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
66 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,49
(excl. BTW)
16,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 13,49
5 - 9
€ 13,22
10 +
€ 12,95
Related Products
A range of steel mitre gears providing a ...
Description:
A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²45° pitch angle, 48° face angle.
A range of steel bevel gears. Made from ...
Description:
A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²20° pressure angle.
The RS PRO 14 teeth metric steel spur ...
Description:
The RS PRO 14 teeth metric steel spur gear has a pitch diameter of 14mm, hub diameter of 10mm and bore diameter of 6mm. The gear has a face width of 15mm. It has a module value of 1. • ...
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.