RS PRO Constant Wattage Trace Heating Cable, 20W/m, 240V ac, -60 → +200 °C, 20m
- RS-stocknr.:
- 665-7508
- Fabrikant:
- RS PRO
1 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs 1 haspel 20 meter
€ 493,36
(excl. BTW)
€ 596,97
(incl. BTW)
| Reel(s) | Per reel | Per meter* |
| 1 + | € 493,36 | € 24,668 |
| *prijsindicatie | ||
- RS-stocknr.:
- 665-7508
- Fabrikant:
- RS PRO
Wetgeving en compliance
Vrijgesteld
- Land van herkomst:
- GB
Productomschrijving
RS PRO Trace Heating Cable - Constant Wattage
RS PRO is proud to offer a range of trace heating cables. These cables are of the highest quality and are designed to be cut from reel lengths and site terminated to suit pipe work. The constant wattage tape consists of several short heating zones, each connected across a pair of continuous bus-wire conductors. Each complete heating zone will give its full-rated design output with circuit voltage applied to the bus-wire conductors.
Features and Benefits
- Cable measurements available are 20 m or 100 m
- Designed to be cut from reel lengths
- Parallel circuit - constant watt for hazardous areas
- Short heating zones
Specification
- Cable Type: Constant Wattage
- Sheath Material: Silicone Rubber
- Voltage Rating: 110 V or 240 V
- Operating Temperature Range -60 to +200 °C
- Hazardous Area Certification: ATEX
- BS EN 60079-0:2009, BS EN 60079-30-1:2007
RS PRO 110V ac Trace Heating Cable Variants – Available Separately
RS PRO 240V ac Trace Heating Cable Variants – Available Separately
Specificaties
Kenmerk | Waarde |
|---|---|
| Cable Type | Constant Wattage |
| Output per Metre | 20W |
| Self Regulating | No |
| Voltage Rating | 240V ac |
| Minimum Operating Temperature | -60°C |
| Maximum Operating Temperature | +200°C |
| Operating Temperature Range | -60 → +200 °C |
| Length | 20m |
| Sheath Material | Silicone Rubber |
| Hazardous Area Certification | ATEX |
| Standards Met | BS EN 60079-0:2009, BS EN 60079-30-1:2007 |