DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. For more about DC motors.

DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:


  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve


Types of DC Motors


There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and air compressors, where reliability and ruggedness are required.


 Applications

DC Motors can be used in applications such as conveyor belts and turntables, or in industrial machines where constant ar low-speed torque is needed.


...
Lees meer Lees minder

Filters

1 - 20 van 1083 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Gearhead Type Length Gear Ratio Dimensions Current Rating Width Depth Core Construction
RS-stocknr. 781-3046
Fabrikantnummer900-00008
FabrikantParallax Inc
€ 14,23
Each
Aantal stuks
4 → 6 V Servo - 50 rpm - 27 Ncm - 406mm - 406 x 55.8 x 19 mm - 55.8mm 19mm -
RS-stocknr. 413-0638
FabrikantRS PRO
€ 14,38
Each
Aantal stuks
12 V dc Brushed Geared 1.31 W 274 rpm 4mm 488 gcm Spur 51mm - - 190 mA 27mm - Iron Core
RS-stocknr. 781-3058
Fabrikantnummer900-00005
FabrikantParallax Inc
€ 12,94
Each
Aantal stuks
4 → 6 V Servo 140 mA - - 27 Ncm - 406mm - 406 x 55.8 x 19 mm 140 mA 55.8mm 19mm -
RS-stocknr. 226-1077
Fabrikantnummer0.130.007.027.850
FabrikantBosch
€ 118,74
Each
Aantal stuks
12 V - 28 W 4500 rpm 6mm 6 Ncm - 107mm - 51 (Dia.) x 107 mm 4 A - - -
RS-stocknr. 380-8633
FabrikantDOGA
€ 164,47
Each
Aantal stuks
12 V dc Geared 20 W 40 rpm - 5 Nm Worm 178mm - 178 x 60 x 100.6 mm 5 A 60mm 100.6mm -
RS-stocknr. 413-0622
FabrikantRS PRO
€ 15,87
Each
Aantal stuks
12 V dc Brushed Geared 1.31 W 82 rpm 4mm 10 Ncm Spur 51mm - - 190 mA 27mm - Iron Core
RS-stocknr. 380-8649
Fabrikantnummer111.3761.30.00E
FabrikantDOGA
€ 172,95
Each
Aantal stuks
24 V dc Brushed Geared 20 W 40 rpm 9mm 5 Nm Worm 178mm - 178 x 60 x 100.6 mm 2.5 A 60mm 100.6mm -
RS-stocknr. 829-3500
Fabrikantnummer103H5210-5240
FabrikantSanyo Denki
€ 49,39
Each
Aantal stuks
24 V Hybrid Stepper - - 5mm - - - - - 1 A - 49.5mm -
RS-stocknr. 320-590
Fabrikantnummer82802013
FabrikantCrouzet
€ 172,35
Each
Aantal stuks
12 V dc Geared 17 W 100 rpm 6mm 1.2 Nm Spur 85mm - 85 x 64.1 x 126 mm - 64.1mm 126mm Iron Core
RS-stocknr. 420-625
FabrikantRS PRO
€ 140,05
Each
Aantal stuks
12 V dc Brushed Geared 38.7 W 1250 rpm 12mm 2781 gcm Planetary 98.5mm - - 4.61 A 51.8mm - Iron Core
RS-stocknr. 829-3522
Fabrikantnummer4835728-1
FabrikantSanyo Denki
€ 3,00
Each
Aantal stuks
- - - - - - - - - - - - - -
RS-stocknr. 834-7647
FabrikantRS PRO
€ 15,19
Each
Aantal stuks
3 V Brushed Geared 0.58 W 45 rpm 3mm 9 Ncm Spur 24.25mm - 29.25 x 10 x 12 mm 320 mA 12mm 12mm Metal
RS-stocknr. 248-3671
FabrikantnummerRS555
FabrikantMellor Electric
€ 16,32
Each
Aantal stuks
24 V Brushed - 3500 rpm - 10 Ncm - - - - - - - Iron Core
RS-stocknr. 420-631
FabrikantRS PRO
€ 58,62
Each
Aantal stuks
12 V dc Brushed Geared 41.3 W 1750 rpm 8mm 2240 gcm Planetary 98.5mm - - 5.5 A 44.6mm - Iron Core
RS-stocknr. 238-9642
FabrikantRS PRO
€ 7,35
Each
Aantal stuks
3 V dc Brushed Geared 1.29 W 2 → 3700 rpm 2mm 10.92 gcm Spur 52mm - - 1.05 A 110mm - Iron Core
RS-stocknr. 238-9670
FabrikantRS PRO
€ 33,12
Each
Aantal stuks
12 V dc Brushed Geared 19.8 W 98 rpm 6mm 59 Ncm Spur 78mm - - 2.81 A 37mm - Iron Core
RS-stocknr. 420-693
FabrikantRS PRO
€ 18,83
Each
Aantal stuks
12 V dc Brushed Geared 1.3 W 33 rpm 4mm 12 Ncm Spur 51mm - - 194 mA 27mm - Iron Core
RS-stocknr. 829-3512
Fabrikantnummer103H7123-5740
FabrikantSanyo Denki
€ 57,82
Each
Aantal stuks
24 V Hybrid Stepper - - 6.35mm - - - - - 2 A - 53.8mm -
RS-stocknr. 901-3305
FabrikantRS PRO
€ 84,49
Each
Aantal stuks
24 V dc Brushed Geared - 260 rpm 6mm 70 mNm Spur 71.2mm 18:1 71.2 x 38 x 38 mm - 38mm 38mm Iron Core
RS-stocknr. 834-7669
FabrikantRS PRO
€ 46,38
Each
Aantal stuks
12 V Brushed Geared 41.3 W 194 rpm 6mm 78 Ncm Planetary 71mm - 32 (Dia.) x 93 mm 990 mA 32 (Dia.)mm - Iron Core