DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. For more about DC motors.

DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:


  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve


Types of DC Motors


There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and air compressors, where reliability and ruggedness are required.


 Applications

DC Motors can be used in applications such as conveyor belts and turntables, or in industrial machines where constant ar low-speed torque is needed.


...
Lees meer Lees minder

Filters

1 - 20 van 163 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Gearhead Type Length Gear Ratio Dimensions Current Rating Width Depth Core Construction
RS-stocknr. 320-590
Fabrikantnummer82802013
FabrikantCrouzet
€ 172,35
Each
Aantal stuks
12 V dc Geared 17 W 100 rpm 6mm 1.2 Nm Spur 85mm - 85 x 64.1 x 126 mm - 64.1mm 126mm Iron Core
RS-stocknr. 178-5178
Fabrikantnummer82867012
FabrikantCrouzet
€ 175,26
Each
Aantal stuks
24 V dc Brushed Geared 3 W 8 rpm 8mm 5 Nm Spur 65mm - 65 x 65 x 79.8 mm - 65mm 79.8mm Iron Core
RS-stocknr. 440-262
Fabrikantnummer82910003
FabrikantCrouzet
€ 37,52
Each
Aantal stuks
12.7 V Permanent Magnet Stepper - - 2mm - - - - - 190 mA - 21.7mm -
RS-stocknr. 178-4658
Fabrikantnummer82862004
FabrikantCrouzet
€ 87,14
Each
Aantal stuks
24 V dc Brushed Geared 3 W 440 rpm 5mm 50 Ncm - 68.1mm - - - 35.4mm - Iron Core
RS-stocknr. 178-4995
Fabrikantnummer82869012
FabrikantCrouzet
€ 102,73
Each
Aantal stuks
24 V dc Brushed Geared 3 W 54 rpm 6mm 2 Nm Ovoid 79.6mm - 79.6 x 54.2 x 65.7 mm - 54.2mm 65.7mm Iron Core
RS-stocknr. 409-5305
Fabrikantnummer82800036
FabrikantCrouzet
€ 87,90
Each
Aantal stuks
12 V Brushed 15.7 W 2000 rpm 6mm 75 mNm - 84.8mm - 50.2 (Dia.) x 84.8 mm 2.5 A - - Iron Core
RS-stocknr. 178-5011
Fabrikantnummer82869014
FabrikantCrouzet
€ 102,73
Each
Aantal stuks
24 V dc Brushed Geared 3 W 13 rpm 6mm 2 Nm Ovoid 79.6mm - 79.6 x 54.2 x 65.7 mm - 54.2mm 65.7mm Iron Core
RS-stocknr. 178-4585
Fabrikantnummer82862001
FabrikantCrouzet
€ 87,14
Each
Aantal stuks
12 V dc Brushed Geared 3 W 440 rpm 5mm 50 Ncm Spur 68.1mm - - - 35.4mm - Iron Core
RS-stocknr. 789-3026
Fabrikantnummer89890011
FabrikantCrouzet
€ 192,44
Each
Aantal stuks
24 V Brushed 209 W 3430 rpm 8mm 290 mNm - 155mm - 63 (Dia.) x 155 mm 35.3 A - - Permanent Magnet
RS-stocknr. 178-4989
Fabrikantnummer82869011
FabrikantCrouzet
€ 102,73
Each
Aantal stuks
24 V dc Brushed Geared 3 W 108 rpm 6mm 2 Nm Ovoid 79.6mm - 79.6 x 54.2 x 65.7 mm - 54.2mm 65.7mm Iron Core
RS-stocknr. 122-0061
Fabrikantnummer80149646
FabrikantCrouzet
€ 728,73
Each
Aantal stuks
100 V dc Brushless Geared 125 W 40 rpm 14mm 30.7 Nm Planetary 57.2mm 99.5:1 57.2 x 57.2 x 245.8 mm 12 A 57.2mm 245.8mm -
RS-stocknr. 178-4670
Fabrikantnummer82862006
FabrikantCrouzet
€ 87,14
Each
Aantal stuks
24 V dc Brushed Geared 3 W 45 rpm 5mm 50 Ncm Spur 68.1mm - - - 35.4mm - Iron Core
RS-stocknr. 178-5033
Fabrikantnummer82869016
FabrikantCrouzet
€ 102,73
Each
Aantal stuks
24 V dc Brushed Geared 3 W 2.9 rpm 6mm 2 Nm Ovoid 79.6mm - 79.6 x 54.2 x 65.7 mm - 54.2mm 65.7mm Iron Core
RS-stocknr. 715-106
Fabrikantnummer82800042
FabrikantCrouzet
€ 145,77
Each
Aantal stuks
12 V Brushed 16 W 3370 rpm - 75 Ncm - - - - - - - Iron Core
RS-stocknr. 789-3039
Fabrikantnummer8981A130
FabrikantCrouzet
€ 267,71
Each
Aantal stuks
24 V dc Brushed Geared 20 W 9 rpm 8mm 15 Nm Planetary - - 42 (Dia.) x 175.9 mm 3.3 A - - Permanent Magnet
RS-stocknr. 178-4816
Fabrikantnummer82861015
FabrikantCrouzet
€ 76,91
Each
Aantal stuks
24 V dc Brushed Geared 3 W 430 rpm 4mm 50 Ncm Ovoid 61.3mm - 61.3 x 54.2 x 65.9 mm - 54.2mm 65.9mm Iron Core
RS-stocknr. 178-5061
Fabrikantnummer82867003
FabrikantCrouzet
€ 175,26
Each
Aantal stuks
12 V dc Brushed Geared 3 W 103 rpm 8mm 5 Nm Spur 65mm - 65 x 65 x 79.8 mm - 65mm 79.8mm Iron Core
RS-stocknr. 178-5005
Fabrikantnummer82869013
FabrikantCrouzet
€ 102,73
Each
Aantal stuks
24 V dc Brushed Geared 3 W 27 rpm 6mm 2 Nm Ovoid 79.6mm - 79.6 x 54.2 x 65.7 mm - 54.2mm 65.7mm Iron Core
RS-stocknr. 178-5027
Fabrikantnummer82869015
FabrikantCrouzet
€ 102,73
Each
Aantal stuks
24 V dc Brushed Geared 3 W 7 rpm 6mm 2 Nm Ovoid 79.6mm - 79.6 x 54.2 x 65.7 mm - 54.2mm 65.7mm Iron Core
RS-stocknr. 178-5112
Fabrikantnummer82867007
FabrikantCrouzet
€ 175,26
Each
Aantal stuks
24 V dc Brushed Geared 3 W 344 rpm 8mm 5 Nm Spur 65mm - 65 x 65 x 79.8 mm - 65mm 79.8mm Iron Core