DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:

  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve

Types of DC Motors
There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and compressors, where reliability and ruggedness are required.

...
Lees meer Lees minder

Filters

1 - 20 van 44 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Gearhead Type Length Gear Ratio Dimensions Current Rating Width Depth Core Construction
RS-stocknr. 921-1335
Fabrikantnummer3272G024CR
FabrikantFaulhaber
€ 400,21
Each
Aantal stuks
24 V Brushed 85 W 5150 rpm 5mm 11 mNm - - - 32 (Dia.) x 94 mm 3.5 A 32 (Dia.)mm 94mm Ironless
RS-stocknr. 873-4782
Fabrikantnummer1524T006SR
FabrikantFaulhaber
€ 69,29
Each
Aantal stuks
6 V Brushed 1.72 W 3860 rpm 1.5mm 2.9 mNm - 31.9mm - 15 (Dia.) x 31.9 mm 560 mA - - Metal
RS-stocknr. 905-8752
Fabrikantnummer2233A024S + 22E 102:1
FabrikantFaulhaber
€ 142,56
Each
Aantal stuks
24 V dc Brushed Geared 8 W 5000 rpm 4mm 30 Ncm Spur 65.7mm 102:1 22 (Dia.) x 65.7 mm - 22mm - Metal
RS-stocknr. 873-4811
Fabrikantnummer2250S024BX4
FabrikantFaulhaber
€ 186,45
Each
Aantal stuks
24 V Brushless 17.3 W 4870 rpm 3mm 26.2 mNm - 64mm - 22 (Dia.) x 64 mm 850 mA - - -
RS-stocknr. 905-8761
Fabrikantnummer2233F006S + 22/2 975:1
FabrikantFaulhaber
€ 136,07
Each
Aantal stuks
6 V dc Brushed Geared 8 W 4000 rpm 4mm 10 Ncm Spur 72.3mm 975:1 23.8 (Dia.) x 72.3 mm - 23.8mm - Metal
RS-stocknr. 921-1341
FabrikantnummerAM1524-2R-V-12-150-05
FabrikantFaulhaber
€ 299,58
Each
Aantal stuks
12 V Bipolar, Unipolar Stepper - - 1.5mm - - - - - 75 mA - 19.5mm -
RS-stocknr. 873-4792
Fabrikantnummer2237S012CXR
FabrikantFaulhaber
€ 98,88
Each
Aantal stuks
12 V Brushed 8.1 W 4450 rpm 3mm 12 mNm - 49.2mm - 22 (Dia.) x 49.2 mm 900 mA - - Graphite
RS-stocknr. 873-4767
Fabrikantnummer2619S012SR 33:1
FabrikantFaulhaber
€ 103,56
Each
Aantal stuks
12 V dc Brushed Geared 0.97 W 151 rpm 3mm 100 (Intermittent) mNm, 30 (Continuous) mNm Spur 30.1mm 33:1 26 (Dia.) x 30.1 mm - - - Metal
RS-stocknr. 873-4830
Fabrikantnummer1016M012G+10/1 256:1
FabrikantFaulhaber
€ 195,17
Each
Aantal stuks
12 V dc Brushed Geared 0.36 W 15 rpm 2.92mm 10 Ncm Planetary 34.7mm 256:1 10 (Dia.) x 21.8 mm 149 (Constant) mA, 4 (No Load) mA, 80 (Continuous) mA 10mm 21.8mm Metal
RS-stocknr. 921-1319
Fabrikantnummer2619S024SR IE2-16 112:1
FabrikantFaulhaber
€ 158,62
Each
Aantal stuks
24 V dc Brushed Geared 1.22 W 44 rpm 3mm 93 mNm - - 112:1 26 (Dia.) x 32.4 mm - 26 (Dia.)mm 32.4mm Metal
RS-stocknr. 921-1316
Fabrikantnummer2619S024SR IE2-16 33:1
FabrikantFaulhaber
€ 140,19
Each
Aantal stuks
24 V dc Brushed Geared 1.22 W 151 rpm 3mm 30 mNm - - 33:1 26 (Dia.) x 32.4 mm - 26 (Dia.)mm 32.4mm Metal
RS-stocknr. 921-1307
Fabrikantnummer2619S006SR IE2-16 1257:1
FabrikantFaulhaber
€ 203,47
Each
Aantal stuks
6 V dc Brushed Geared 1.11 W 4 rpm 3mm 10 Ncm - - 1257:1 26 (Dia.) x 32.4 mm - 26 (Dia.)mm 32.4mm Metal
RS-stocknr. 873-4802
Fabrikantnummer2237S024CXR
FabrikantFaulhaber
€ 98,88
Each
Aantal stuks
24 V Brushed 8.5 W 4560 rpm 3mm 12 mNm - 49.2mm - 22 (Dia.) x 49.2 mm 460 mA - - Graphite
RS-stocknr. 873-4758
Fabrikantnummer2607T006SR
FabrikantFaulhaber
€ 49,55
Each
Aantal stuks
6 V Brushed 1.08 W 2500 rpm 1.5mm 3.2 mNm - 13.9mm - 26 (Dia.) x 13.9 mm 400 mA - - Metal
RS-stocknr. 122-4621
FabrikantnummerADM1220S-2R-V3-83 + M2X0.2X15 + 2.8000.08.353
FabrikantFaulhaber
€ 593,44
Each
Aantal stuks
3 V Disc Magnet Stepper - - 1.5mm - - - - - 220 mA - 0mm -
RS-stocknr. 873-4795
Fabrikantnummer2224U012SR
FabrikantFaulhaber
€ 90,99
Each
Aantal stuks
12 V Brushed 4.05 W 4390 rpm 2mm 6.7 mNm - 32.3mm - 22 (Dia.) x 32.3 mm 520 mA - - Metal
RS-stocknr. 873-4786
Fabrikantnummer1524T012SR
FabrikantFaulhaber
€ 79,01
Each
Aantal stuks
12 V Brushed 1.78 W 4130 rpm 1.5mm 2.9 mNm - 31.9mm - 15 (Dia.) x 31.9 mm 280 mA - - Metal
RS-stocknr. 873-4809
Fabrikantnummer2657W024CXR
FabrikantFaulhaber
€ 198,57
Each
Aantal stuks
24 V Brushed 45.7 W 5110 rpm 4mm 40 mNm - 69.4mm - 26 (Dia.) x 69.4 mm 1.2 A - - Graphite
RS-stocknr. 873-4818
Fabrikantnummer2232S012BX4
FabrikantFaulhaber
€ 169,55
Each
Aantal stuks
12 V Brushless 8.8 W 4450 rpm 3mm 14.7 mNm - 46mm - 22 (Dia.) x 46 mm 1 A - - -
RS-stocknr. 905-8764
Fabrikantnummer2233F006S + 22/2 30.7:1
FabrikantFaulhaber
€ 187,58
Each
Aantal stuks
6 V dc Brushed Geared 8 W 4000 rpm 4mm 10 Ncm Spur 63.6mm 30.7:1 23.8 (Dia.) x 63.6 mm - 23.8mm - Metal