What is it? A Temperature transmitter are normally used in industrial manufacturing as a means of process control because they can provide feedback regarding temperature during different stages in the manufacturing process. Temperature transmitters isolate, amplify, filter noise, linearize, and convert the input signal from the sensor then send (transmit) a standardized output signal to the control device. 4-20ma temperature transmitters are common in manufacturing as the majority of industrial equipment communicates via this signal range. They are available in many forms which vary in degrees of sophistication going from compact DIN rail mounted units to programmable smart devices. Types of Transmitters Head Mount -Head mount transmitters offer a less expensive way to make industrial temperature measurements. Field Mount - Field-mount temperature transmitters are designed to operate in the harshest environments. Rail Mount -Rail-mount temperature transmitters are designed to be mounted on DIN-rails located in non-harsh environments. With the mounting style, the transmitters can be grouped together for easy access.
Description:
The ADF7012 is a low-power RF transmitter designed
for short-range devices (SRDs) operating in the sub-1GHz ISM bands. RF Frequency Range: 75 to 1000MHzRF Output Power: up to +14dBmModulation: FSK, GFSK, OOK, GOOK or ASKSupports multi-channel operationOTA Data Rate: up ...
Description:
The TDA7100 is a low-power ASK/FSK wireless transmitter
operating in the 434MHz ISM band. RF Frequency Range: 427 to 442MHz ISM bandRF Output Power: +5dBmModulation: FSK, ASKOTA Data Rate: 20kbpsPower-down modePower supply: +2.1 to +4.0VdcOperating temperature range: -20 to +70°CApplications: ...
Description:
EYC-Tech PT02 series PT100 temperature transmitter measure a
PT100 input signal and convert to a 4 mA to 20 mA analogue output. IP30 rated High accuracy Polarity, signal disconnection and signal short circuit protection Monitoring for long-distance temperature signal transmission ...
Description:
The LKM 145 is a digital programmable transmitter
for resistance sensors with 4..20mA current output for mounting in the J-head. The sensor type and measuring range can be defined via PC and programming cable. It is operated in 2L circuit. ...