Circular connector backshells are components of a wiring system that attach to the cable side of a circular connector in order to provide robustness and ensure its integrity. They are typically separate from the connector head itself, and secure the cable to the connector via a clamp.
Why are circular connector backshells needed?
Circular connector backshells help to protect the connector, and to safeguard the reliability of the cable and ultimately the entire system. They prevent the ingress of dirt, moisture and liquids into the connector head by providing a tight seal against the cable itself. In addition they act as an effective form of strain relief for the connector assembly, ensuring that the cable cannot be bent to an excessive angle, which could potentially damage it.
What are circular connector backshells used for?
Circular connector backshells are used to shield wire connection points of interconnecting cables and connectors. They may also be used to shield against electrical interference in a system by acting as a continuation of the cable ground sheath directly into the connector itself.
Description:
The DuraMate™ AHDM environmentally-sealed, multi-pin, heavy duty, metal,
circular connector series provides an economical quick-connect bayonet locking system manufactured to withstand the challenges and complexities of harsh environment off-road Applications.
Description:
Dual purpose spin coupling backshells may be used
in conjunction with heatshrink boots or spring clips (for example, stock no. 241-1519) to terminate braided cable jacketing. The threaded coupling end rotates separately from the body so that cable is not ...
Description:
The TNM connector range builds on the popular
Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability. Provides cable shielding terminationInternal braid is grounded to outer shellAvailable in a standard or large ...
Description:
From Amphenol, this bandlock adaptor is effective for
the termination of screens, using tempered bands. ● Aluminium Alloy, Zinc Cobalt plated● Straight and 90 degree (Chimney Pot) available● Suitable for overmoulding● Low DC resistance● Rohs compliant.