End Mills

An end mill is a type of cutting tool that is used in milling applications. End Mills have cutting edges on the end and sides of the shank enabling them to cut in all directions.


Why use an end mill?


The end mill removes material by their movement within the milling machine or from the cutter’s shape.


The number of flutes (spirals on the end mill) give different results:



  • 2 flutes allow maximum space for chip ejection and are used for general milling operations

  • 3 flutes is an excellent choice for slotting, it has a larger cross-section and is used in general milling operations

  • 4, 5, 6 and 8 flutes can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finish

What types of End Mills are available?


End cut types:



  • Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut.

  • Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.

Shank Types



  • End mills with a plain shank are used with a collet style holder and are the most common shank type

  • End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it
    from rotating

Typical applications of End Mills


End mills are used for profiling milling, face milling, tracer milling, semi-finishing and finishing.


...
Lees meer Lees minder

Filters

1 - 20 van 91 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Cutter Diameter Cut Length Number of Flutes Material Overall Length Shank Type Shank Diameter Centre Cutting Diameter Tolerance
RS-stocknr. 523-0436
FabrikantRS PRO
€ 9,96
Each
Aantal stuks
1mm 2mm - HSCo 24.5 mm Weldon 6 mm - -
RS-stocknr. 523-0600
FabrikantRS PRO
€ 8,97
Each
Aantal stuks
6mm 16mm - HSS 48 mm Weldon 6 mm - -
RS-stocknr. 523-0521
FabrikantRS PRO
€ 10,02
Each
Aantal stuks
1.5mm 4mm - HSS 28 mm Weldon 6 mm - -
RS-stocknr. 523-0537
FabrikantRS PRO
€ 8,97
Each
Aantal stuks
2mm 4.5mm - HSS 29 mm Weldon 6 mm - -
RS-stocknr. 523-0571
FabrikantRS PRO
€ 8,97
Each
Aantal stuks
4mm 9.5mm - HSS 39 mm Weldon 6 mm - -
RS-stocknr. 523-0593
FabrikantRS PRO
€ 10,36
Each
Aantal stuks
5mm 12.5mm - HSS 44.5 mm Weldon 6 mm - -
RS-stocknr. 523-0486
FabrikantRS PRO
€ 9,53
Each
Aantal stuks
3.5mm 5.5mm - HSCo 30 mm Weldon 6 mm - -
RS-stocknr. 523-0559
FabrikantRS PRO
€ 8,99
Each
Aantal stuks
3mm 7.5mm - HSS 34 mm Weldon 6 mm - -
RS-stocknr. 523-0543
FabrikantRS PRO
€ 10,73
Each
Aantal stuks
2.5mm 6.5mm - HSS 32 mm Weldon 6 mm - -
RS-stocknr. 523-0515
FabrikantRS PRO
€ 9,57
Each
Aantal stuks
6mm 9.5mm - HSCo 36 mm Weldon 6 mm - -
RS-stocknr. 523-0458
FabrikantRS PRO
€ 9,81
Each
Aantal stuks
2mm 3mm - HSCo 25.5 mm Weldon 6 mm - -
RS-stocknr. 523-0492
FabrikantRS PRO
€ 9,53
Each
Aantal stuks
4mm 6.5mm - HSCo 32.5 mm Weldon 6 mm - -
RS-stocknr. 136-8073
FabrikantRS PRO
€ 132,06
Each
Aantal stuks
8 mm, 10 mm, 12 mm, 16 mm, 20 mm - - HSS 100 mm Screwed - Yes -
RS-stocknr. 523-0470
FabrikantRS PRO
€ 9,59
Each
Aantal stuks
3mm 4.5mm - HSCo 28 mm Weldon 6 mm - -
RS-stocknr. 185-7558
FabrikantRS PRO
€ 226,06
1 Set
Set(s)
3 mm, 4 mm, 6 mm, 8 mm 9.5 mm, 12.5 mm - HSCo 54 mm, 57 mm, 60.5 mm, 63.5 mm, 66.5 mm, 70 mm, 73 mm, 77 mm, 80 mm, 83.5 mm Screwed 6 mm, 12 mm, 16 mm Yes -
RS-stocknr. 523-0565
FabrikantRS PRO
€ 9,10
Each
Aantal stuks
3.5mm 8.5mm - HSS 36.5 mm Weldon 6 mm - -
RS-stocknr. 523-0464
FabrikantRS PRO
€ 9,54
Each
Aantal stuks
2.5mm 4mm - HSCo 26 mm Weldon 6 mm - -
RS-stocknr. 523-0509
FabrikantRS PRO
€ 9,85
Each
Aantal stuks
5mm 7.5mm - HSCo 36 mm Weldon 6 mm - -
RS-stocknr. 666-6693
FabrikantnummerS9043.0
FabrikantDormer
€ 14,70
Each
Aantal stuks
3mm 12mm - Solid Carbide 38 mm Plain 3 mm Yes -
RS-stocknr. 728-7831
FabrikantnummerC2471/8
FabrikantDormer
€ 40,38
Each
Aantal stuks
3.2mm 10mm - HSS-E-PM 54 mm Weldon 6 mm - -
Related Products
HSCo standard length flatted shank 2 flute 'throw-away' ...
Description:
HSCo standard length flatted shank 2 flute 'throw-away' mini-mill for most materials30° helix for excellent surface finishManufactured from Cobalt Steel for increased wear resistance.
Disposable/Throw-away, short and long series milling cutters made ...
Description:
Disposable/Throw-away, short and long series milling cutters made from high speed cobalt steelE8 tolerance on diameter, P9 tolerance in keyway production in a single cut.
These slot drills have a parallel shank with ...
Description:
These slot drills have a parallel shank with flats, diameter tolerance e8 (undersize h10), 3 flute, short length, centre cutting, 30° spiral, HSCo 8%. They are to DIN327 form D. Applications include keyway and slot milling, and production of closed ...
Four-fluteTo DIN 6535, UK STANDARD 3 & 4Plain ...
Description:
Four-fluteTo DIN 6535, UK STANDARD 3 & 4Plain shank with special web designFlute helix angle 38°Suitable for high speed, high temperature cutting and finishing of abrasive materialsTungsten carbide (grade K10)h6 diameter tolerance.