The CEL roboxdual 3D printer is an update to the original Robox. It comes with two headLock compatible heads allowing you to print in two different materials and colours, or different support material to the main part. The roboxdual printer has a heated bed and uses advanced automaker software that provides good control and flexibility of overprint settings. The locking safety door quarantines the part during printing and provides a controlled environment. It is a micro-manufacturing platform. The precise positioning of the 3-axis system, along with the mechanical and electronic design of the headLock system, provides a robust framework to build a range of manipulators and scanning devices allowing this robot, in a box, to do much more than just create 3D prints.
Features and Benefits
Fused Filament Fabrication (FFF) Standard layer resolution 200 microns / 0.2 mm Position precision for XY axis is XY: 7.5 microns / 0.0075 mm and for Z axis is 0.15625 microns / 0.00015625 mm Model Materials are PLA, ABS, PETG, PC & Nylon Build size is 210 x 150 x 100 mm Support Materials are PolySupport & HIPS Automatic material recognition with no setup required Compatible with 3rd party filament - no vendor lock-in Fully automatic bed levelling and easy calibration Hassle-free build plate with no glue or tape required Needle valves ensure only desired material is printed Rapid head (<1min) and bed(<4mins) heat-up times Stainless steel frame and injection moulded housing