Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	3M
	Disc Diameter	230mm
	Product Type	Abrasive Wheel
	Thickness	2mm
	Abrasive Material	Ceramic
	Grit Size	36
	Maximum Safe Speed	6650rpm
	Standards/Approvals	No
	Series	Cubitron

	Alles selecteren
	Merk 3M
	Disc Diameter 230mm
	Product Type Abrasive Wheel
	Thickness 2mm
	Abrasive Material Ceramic
	Grit Size 36
	Maximum Safe Speed 6650rpm
	Standards/Approvals No
	Series Cubitron

Datasheet - 7100303998

Vrijgesteld

Land van herkomst:: AT

3M Cubitron Series Cutting Disc, 230mm Disc Diameter, 36 Grit Size - 7100303998

This cutting disc is a thin, high-speed abrasive wheel designed for precision material separation in industrial and workshop environments. It uses a ceramic abrasive to deliver rapid stock removal and consistent cutting action when operated on suitable powered equipment. The disc is intended for heavy-duty metalworking tasks where efficient cutting performance is required.

Features and Benefits:

• Ceramic abrasive composition for accelerated material removal
• 36 grit abrasive balance for aggressive cutting action
• 2mm thin profile for narrow kerf and reduced material loss
• Rated maximum safe speed of 6650 r/min for high-speed operation

Applications

• Suitable for trimming and cutting steel sections
• Ideal for cutting sheet metal and plate edges
• Used with angle grinders in fabrication shops
• Can be used for on-site metal maintenance work

What operating speed should be observed to ensure safe use?

Use equipment that does not exceed the specified maximum safe speed of 6650 r/min to prevent disc failure and maintain safe operation.

How does the abrasive type affect cutting performance on hardened metals?

The ceramic construction keeps cutting edges sharp for longer, providing sustained removal rates when working on tougher steel grades.

What advantage does the disc thickness provide for precision tasks?

At 2mm thickness the wheel produces a slim kerf, minimising material loss and reducing heat build-up during narrow cuts.

Which grit grade is appropriate for rapid sectional cutting versus fine finishing?

The 36 grit specification is selected for aggressive sectional cutting where fast metal removal is required rather than fine finishing.

3M Cubitron Ceramic, 230 mm x 2 mm Thick, 36 Grit

GRATIS bezorging voor bestellingen van meer dan € 90,00