3M 339 Aluminium Oxide, 60 mm Diameter, P60 Grit
- RS-stocknr.:
- 763-8911
- Fabrikantnummer:
- FC110075734
- Fabrikant:
- 3M
Subtotaal (1 eenheid)*
€ 5,49
(excl. BTW)
€ 6,64
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Beperkte voorraad
- 30 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 5,49 |
*prijsindicatie
- RS-stocknr.:
- 763-8911
- Fabrikantnummer:
- FC110075734
- Fabrikant:
- 3M
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | 3M | |
| Product Type | Flap Wheel | |
| Abrasive Material | Aluminium Oxide | |
| Grit Size | P60 | |
| Sub Type | Flap Wheel | |
| Diameter | 60mm | |
| Face Width | 15mm | |
| Maximum Safe Speed | 12700rpm | |
| Shank Size | 6mm | |
| Standards/Approvals | No | |
| Series | 339 | |
| Alles selecteren | ||
|---|---|---|
Merk 3M | ||
Product Type Flap Wheel | ||
Abrasive Material Aluminium Oxide | ||
Grit Size P60 | ||
Sub Type Flap Wheel | ||
Diameter 60mm | ||
Face Width 15mm | ||
Maximum Safe Speed 12700rpm | ||
Shank Size 6mm | ||
Standards/Approvals No | ||
Series 339 | ||
Vrijgesteld
- Land van herkomst:
- PL
3M 339 Series Flap Wheel, 60mm Diameter, 15mm Face Width - FC110075734
This flap wheel is a rotating abrasive tool designed for material removal and surface finishing on metal components when mounted in a handheld or machine-driven grinder. It is constructed with layered abrasive flaps and a central shank that fits into power tools, providing controlled stock removal and surface conditioning at elevated rotational speeds for tasks common in automation, electronics, electrical and mechanical settings.
Features and Benefits:
• Aluminium oxide abrasive delivers consistent cutting action • P60 grit balances stock removal and surface refinement • 12,700 rpm maximum speed enables high-rate metalworking • 6mm shank ensures secure mounting in compatible chucks • 15mm face width concentrates abrasion for focused finishing
Applications
• Suitable for deburring machined steel edges • Ideal for blending weld seams on fabricated parts • Used with handheld grinders for panel preparation • Can be used for smoothing castings prior to assembly • Used for removing scale and oxidation from metal surfaces
What material is the abrasive and how does that affect performance?
The abrasive is aluminium oxide, which provides Durable cutting on ferrous alloys and maintains abrasive life under heat generated during metalworking.
How does the face width influence task selection?
The 15mm face concentrates abrasive action, making it appropriate for targeted finishing and confined areas where broader discs would be unsuitable.
Which shaft size is required for tool compatibility?
A 6mm shank is specified, so use a grinder or spindle accepting that diameter to ensure firm retention and minimise runout.
What should be observed regarding rotational limits during use?
Operate below the 12,700 rpm maximum safe speed to avoid mechanical overload and ensure the assembly functions within its rated dynamic balance.
What grit level is provided and what outcome does it produce?
The P60 grit offers a medium-coarse cut rate suitable for initial surface levelling and preparatory finishing without over-polishing.