FTDI Chip 9W Plug-In AC/DC Adapter 9V dc Output, 1A Output
- RS-stocknr.:
- 720-3739
- Fabrikantnummer:
- VNCLO-PSU-EU
- Fabrikant:
- FTDI Chip
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 720-3739
- Fabrikantnummer:
- VNCLO-PSU-EU
- Fabrikant:
- FTDI Chip
Specificaties
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Adapter Type | Plug-In Adapter | |
| Plug Type | Type C | |
| Output Voltage | 9V dc | |
| Input Voltage | 100 V ac, 110 V ac, 115 V ac, 120 V ac, 127 V ac, 220 V ac, 230 V ac, 240V ac | |
| Output Current | 1A | |
| Maximum Temperature | +40°C | |
| Input Connector | EU Plug | |
| Number of Outputs | 1 | |
| Power Rating | 9W | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Adapter Type Plug-In Adapter | ||
Plug Type Type C | ||
Output Voltage 9V dc | ||
Input Voltage 100 V ac, 110 V ac, 115 V ac, 120 V ac, 127 V ac, 220 V ac, 230 V ac, 240V ac | ||
Output Current 1A | ||
Maximum Temperature +40°C | ||
Input Connector EU Plug | ||
Number of Outputs 1 | ||
Power Rating 9W | ||
- Land van herkomst:
- CN
Vinco Development Module
The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and supports connectivity to a wide range of application boards developed by the Arduino open-source community. These include Ethernet, motor control, LCD and many others.
Microcontroller: VNC2-64Q, Variable clock speed: 12/24/48MHz
Flash memory: 256KB, RAM: 16KB
Operating voltage: +5V, Input power supply: +9V
Digital I/O: 30, Analogue I/O: 8
USB port: 2 – configurable for host or device operation
Superset of the Arduino Duemilanove / Uno development boards
FTDI Integrated Development Environment (IDE) including code editor, compiler, assembler and debugger, supplied free of charge and supporting ANSI C coding for easy portability and maintainability
Precompiled drivers for a variety of interfaces e.g. USB, UART, SPI
Precompiled driver support for a wide range of USB host classes including Mass Storage, Human Interface Devices (keyboards, mice), audio devices, video devices (webcam) with many more under development
Compatible with existing Arduino shields
A software configuration wizard is currently under development
Flash memory: 256KB, RAM: 16KB
Operating voltage: +5V, Input power supply: +9V
Digital I/O: 30, Analogue I/O: 8
USB port: 2 – configurable for host or device operation
Superset of the Arduino Duemilanove / Uno development boards
FTDI Integrated Development Environment (IDE) including code editor, compiler, assembler and debugger, supplied free of charge and supporting ANSI C coding for easy portability and maintainability
Precompiled drivers for a variety of interfaces e.g. USB, UART, SPI
Precompiled driver support for a wide range of USB host classes including Mass Storage, Human Interface Devices (keyboards, mice), audio devices, video devices (webcam) with many more under development
Compatible with existing Arduino shields
A software configuration wizard is currently under development
Note
The description above applies to the Vinco Development Platform RS 720-3723 only, information may not apply to accessories and power supplies
Gerelateerde Links
- FTDI Chip Vinculo Host/Slave Development Kit VNCLO-MB1A
- RS PRO 9W Plug-In AC/AC Adapter 9V ac Output, 950mA Output
- XP Power DC-DC Converter 18 → 36 V dc Input Through Hole
- XP Power DC-DC Converter 9 → 18 V dc Input Through Hole
- XP Power DC-DC Converter 36 → 75 V dc Input Through Hole
- TRACOPOWER TMR 9 WI DC-DC Converter 18 → 75 V dc Input Through Hole, +85°C Max Temp
- RF Solutions 12W Power Brick AC/DC Adapter 12V dc Output, 1A Output
- TRACOPOWER TMR 9 DC-DC Converter 36 → 75 V dc Input Through Hole, +85°C Max Temp -40°C
