ROHM BM2P013, AC-DC Converter 7-Pin, DIP
- RS-stocknr.:
- 167-7435P
- Fabrikantnummer:
- BM2P013
- Fabrikant:
- ROHM
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 167-7435P
- Fabrikantnummer:
- BM2P013
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Mounting Type | Through Hole | |
| Pin Count | 7 | |
| Dimensions | 9.3 x 6.45 x 3.5mm | |
| Package Type | DIP | |
| Minimum Input Voltage | 650 V ac | |
| Maximum Operating Temperature | +105 °C | |
| Length | 9.3mm | |
| Width | 6.45mm | |
| Height | 3.5mm | |
| Minimum Operating Temperature | -40 °C | |
| Operating Temperature Range | -40 → +105 °C | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Mounting Type Through Hole | ||
Pin Count 7 | ||
Dimensions 9.3 x 6.45 x 3.5mm | ||
Package Type DIP | ||
Minimum Input Voltage 650 V ac | ||
Maximum Operating Temperature +105 °C | ||
Length 9.3mm | ||
Width 6.45mm | ||
Height 3.5mm | ||
Minimum Operating Temperature -40 °C | ||
Operating Temperature Range -40 → +105 °C | ||
The PWM type DC/DC converter (BM2PXX1) for AC/DC provide an optimum system for all products that include an electrical outlet.BM2PXX1 supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters.BM2PXX1 built in a HV starter circuit that tolerates 650V, it contributes to low-power consumption. With current detection resistors as external devices, a higher degree of design freedom is achieved.
PWM frequency : 65kHz
PWM current mode method
Burst operation when load is light
Frequency reduction function
Built-in 650V start circuit
Built-in 650V switching MOSFET
VCC pin under voltage protection
VCC pin overvoltage protection
SOURCE pin Open protection
SOURCE pin Short protection
SOURCE pin Leading-Edge-Blanking function
Per-cycle over current protection circuit
Soft start
Secondary Over current protection circuit
PWM current mode method
Burst operation when load is light
Frequency reduction function
Built-in 650V start circuit
Built-in 650V switching MOSFET
VCC pin under voltage protection
VCC pin overvoltage protection
SOURCE pin Open protection
SOURCE pin Short protection
SOURCE pin Leading-Edge-Blanking function
Per-cycle over current protection circuit
Soft start
Secondary Over current protection circuit