ABB Auxiliary Contact, 2 Contact, 2 NO, CAF6-20M, Front, 6 A, 240 V dc, 500V ac, GJL1201330R0007 CAF6-20M

RS-stocknr.:: 445-8273
Fabrikantnummer:: GJL1201330R0007 CAF6-20M
Fabrikant:: ABB

ABB Auxiliary Contact, 2 Contact, 2 NO, CAF6-20M, Front, 6 A, 240 V dc, 500V ac, GJL1201330R0007 CAF6-20M

Bekijk alle Auxiliary Contacts

Subtotaal (1 eenheid)*

€ 15,28

(excl. BTW)

€ 18,49

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

11 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 15,28

*prijsindicatie

RS-stocknr.:: 445-8273
Fabrikantnummer:: GJL1201330R0007 CAF6-20M
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Product Type	Auxiliary Contact
	Number of Contacts	2
	Normal State Configuration	2 NO
	Series	CAF6-20M
	Mount Type	Front
	Contact Current	6A
	Terminal Type	Screw
	Pole and Throw Configuration	2P
	Contact Voltage	240, 500V dc
	Operational Current Ie	6A
	Minimum Operating Temperature	-25°C
	Rated Insulation Voltage Ui	690V
	Mounting Location	Front Side
	Maximum Operating Temperature	55°C
	Standards/Approvals	IEC/EN 60947-5-1, UL 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, IEC/EN 60947-1

	Alles selecteren
	Merk ABB
	Product Type Auxiliary Contact
	Number of Contacts 2
	Normal State Configuration 2 NO
	Series CAF6-20M
	Mount Type Front
	Contact Current 6A
	Terminal Type Screw
	Pole and Throw Configuration 2P
	Contact Voltage 240, 500V dc
	Operational Current Ie 6A
	Minimum Operating Temperature -25°C
	Rated Insulation Voltage Ui 690V
	Mounting Location Front Side
	Maximum Operating Temperature 55°C
	Standards/Approvals IEC/EN 60947-5-1, UL 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, IEC/EN 60947-1

Vrijgesteld

ABB CAF6-20M Series Auxiliary Contact, 6A Contact Current, 690V Rated Insulation Voltage - GJL1201330R0007 CAF6-20M

This auxiliary contact is a front-mount add-on designed to provide two normally open auxiliary contacts for control and signalling tasks in electrical installations. It connects directly to compatible mini contactors to extend switching logic and status feedback in automation and electrical panels, operating across DC and AC auxiliary circuits.

Features & Benefits

• 2NO 2P configuration delivers simple contact expansion
• Rated insulation 690V ensures high-voltage separation
• Operational current 4A enables reliable control-circuit switching
• Conventional thermal current 6A supports steady auxiliary loads
• Screw terminals provide secure conductor fixation
• Tightening torque 0.8 to 1.1N·m gives consistent contact pressure

Applications

• Suitable for extending control contacts on mini contactors
• Used with motor control circuits requiring front-mounted auxiliaries
• Ideal for status signalling to PLCs and monitoring equipment
• Suitable for retrofit auxiliary functionality in distribution panels
• Used for interlock logic in machine-control cabinets

What wire sizes can be terminated into the contact block?

The terminals accept flexible conductors with ferrules 1/2x1 to 2.5mm², flexible conductors 1/2x1 to 2.5mm² and rigid conductors 1/2x1 to 4mm².

What environmental limits should be observed during installation?

The unit is rated for operation between -25 to +55°C and may be stored between -40 to +80°C

maximum operating altitude is 2000 m.

Which electrical standards does it conform to for industrial use?

It meets IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 and corresponding UL equivalents.

How does the product perform under mechanical stress?

It withstands shock pulses of 11 MS at 15 g and vibration levels of 5 g across 5 to 150 Hz as per IEC 60068 tests.

What torque and stripping preparations are required for reliable connections?

Use a torque of 0.8 to 1.1 N·m and a wire stripping length of 9mm for proper termination.