ABB Auxiliary Contact, 1 Contact, 1 NO, EF14, Front, 6 A, 600 V dc, 690V ac, 1SBN010111R1010 CC4-10
- RS-stocknr.:
- 711-6332
- Fabrikantnummer:
- 1SBN010111R1010 CC4-10
- Fabrikant:
- ABB
Subtotaal (1 eenheid)*
€ 20,60
(excl. BTW)
€ 24,93
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 15 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 20,60 |
*prijsindicatie
- RS-stocknr.:
- 711-6332
- Fabrikantnummer:
- 1SBN010111R1010 CC4-10
- Fabrikant:
- ABB
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ABB | |
| Product Type | Auxiliary Contact | |
| Number of Contacts | 1 | |
| Normal State Configuration | 1 NO | |
| Series | EF14 | |
| Contact Current | 6A | |
| Mount Type | Front | |
| Terminal Type | Screw | |
| Pole and Throw Configuration | 1P | |
| Contact Voltage | 600V dc, 690V dc | |
| Rated Insulation Voltage Ui | 690V | |
| Mechanical Durability | 10Mcycles | |
| Mounting Location | Front Side | |
| Minimum Operating Temperature | -40°C | |
| Operational Current Ie | 6A | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk ABB | ||
Product Type Auxiliary Contact | ||
Number of Contacts 1 | ||
Normal State Configuration 1 NO | ||
Series EF14 | ||
Contact Current 6A | ||
Mount Type Front | ||
Terminal Type Screw | ||
Pole and Throw Configuration 1P | ||
Contact Voltage 600V dc, 690V dc | ||
Rated Insulation Voltage Ui 690V | ||
Mechanical Durability 10Mcycles | ||
Mounting Location Front Side | ||
Minimum Operating Temperature -40°C | ||
Operational Current Ie 6A | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
ABB EF14 Series Auxiliary Contact, 6A Contact Current, 690V Contact Voltage - 1SBN010111R1010 CC4-10
This auxiliary contact is a front-mounted, single-pole leading contact Block designed to extend control circuits in industrial contactor and relay assemblies. It connects via screw terminals and is intended for use in standard industrial environments where a normally open contact is required to signal or interlock auxiliary functions.
Features & Benefits
• 6A rated current for Compact control-circuit switching
• 690V insulation rating for high-voltage auxiliary circuits
• Mechanical endurance 10M cycles to reduce maintenance frequency
• Operates from -40°C to 70°C for a wide ambient range
• Screw terminals support up to 2.5 mm² conductor sizes
• 1NO configuration simplifies wiring for single-function schemes
• 690V insulation rating for high-voltage auxiliary circuits
• Mechanical endurance 10M cycles to reduce maintenance frequency
• Operates from -40°C to 70°C for a wide ambient range
• Screw terminals support up to 2.5 mm² conductor sizes
• 1NO configuration simplifies wiring for single-function schemes
**Applications**
• Suitable for front-side mounting on AF and NF contactors
• Ideal for signalling circuits in motor control panels
• Used with contactor relays to provide leading-contact feedback
• Can be used for auxiliary interlocks in industrial automation
• Ideal for signalling circuits in motor control panels
• Used with contactor relays to provide leading-contact feedback
• Can be used for auxiliary interlocks in industrial automation
What Terminal types and conductor sizes are supported?
Connections use screw terminals compatible with rigid or flexi ble conductors up to 2.5 mm², including insulated ferrules as specified for proper electrical contact.
How does the device handle short-time current stresses?
It withstands short-time currents with rated short-time withstand capacities and specified Peak values for 0.1 s and 1 s impulses, suitable for typical contactor switching transients.
What switching frequency can be expected in demanding operations?
The unit is specified for high mechanical and electrical switching frequencies with separate limits for electrical duty and mechanical cycles, enabling frequent operations in control applications.
Which mounting orientation is required for installation?
The Block is designed for front placement on compatible contactor frames, ensuring correct mechanical engagement and electrical alignment.
Standards
UL 508, CSA C22.2 N14
Gerelateerde Links
- ABB Auxiliary Contact 1 NC Front 600 V dc 1SBN010111R1001 CC4-01
- Lovato Auxiliary Contact 1 NC Front 690V, 11G218
- ABB Auxiliary Contact 1 NO Front 690V, 1SBN011010T1010 CA3-10
- ABB Auxiliary Contact 1 NO Front 600 V dc 1SBN010110R1010 CA4-10
- Schneider Electric Auxiliary Contact Block 1 NO Front 690V ac, LADN10
- Schneider Electric Auxiliary Contact Block 2 NC Front 690V, LA1SK02
- Schneider Electric Auxiliary Contact Block 4 NC Front 690V, LADN043
- Schneider Electric Auxiliary Contact Block 2 NO Front 690V, LADN20