ABB Auxiliary Contact, 4 Contact, 3 NO/1 NC, CA4, Front, 6 A, 600 V dc, 690V ac, 1SBN010140R1131 CA4-31M
- RS-stocknr.:
- 711-6363
- Fabrikantnummer:
- 1SBN010140R1131 CA4-31M
- Fabrikant:
- ABB
Subtotaal (1 eenheid)*
€ 26,36
(excl. BTW)
€ 31,90
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 29 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 26,36 |
*prijsindicatie
- RS-stocknr.:
- 711-6363
- Fabrikantnummer:
- 1SBN010140R1131 CA4-31M
- Fabrikant:
- ABB
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ABB | |
| Product Type | Auxiliary Contact | |
| Number of Contacts | 4 | |
| Normal State Configuration | 3 NO/1 NC | |
| Series | CA4 | |
| Mount Type | Front | |
| Contact Current | 6A | |
| Terminal Type | Screw | |
| Pole and Throw Configuration | 4 | |
| Contact Voltage | 600V dc, 690V dc | |
| Operational Current Ie | 6A | |
| Mechanical Durability | 10Mcycles | |
| Rated Insulation Voltage Ui | 690V | |
| Minimum Operating Temperature | -40°C | |
| Mounting Location | Front Side | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk ABB | ||
Product Type Auxiliary Contact | ||
Number of Contacts 4 | ||
Normal State Configuration 3 NO/1 NC | ||
Series CA4 | ||
Mount Type Front | ||
Contact Current 6A | ||
Terminal Type Screw | ||
Pole and Throw Configuration 4 | ||
Contact Voltage 600V dc, 690V dc | ||
Operational Current Ie 6A | ||
Mechanical Durability 10Mcycles | ||
Rated Insulation Voltage Ui 690V | ||
Minimum Operating Temperature -40°C | ||
Mounting Location Front Side | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
ABB CA4 Series Auxiliary Contact, 6A Operational Current, 690V Rated Insulation Voltage - 1SBN010140R1131 CA4-31M
This auxiliary contact is a 4-pole front-mounted contact Block designed to expand control circuits for contactors in industrial environments. It provides a mix of normally open and normally closed instantaneous contacts to monitor or signal contactor status, and it is intended for mounting on the front side of compatible contactors where screw-terminal connections are required.
Features & Benefits
• 3NO1NC configuration for versatile signalling and monitoring
• 6A operational current at rated conditions for control loads
• 690V insulation rating for high-voltage auxiliary circuits
• Mechanical durability 10M cycles to reduce replacement frequency
• Operating range -40°C to 70°C for harsh ambient conditions
• Screw terminals supporting flexible conductors and solid conductors
• 6A operational current at rated conditions for control loads
• 690V insulation rating for high-voltage auxiliary circuits
• Mechanical durability 10M cycles to reduce replacement frequency
• Operating range -40°C to 70°C for harsh ambient conditions
• Screw terminals supporting flexible conductors and solid conductors
**Applications**
• Suitable for adding auxiliary circuits to AF09–AF16 contactors
• Ideal for status feedback in motor starter panels
• Used with control relays for industrial automation interlocks
• Can be used for lamp or PLC signalling in switchgear
• Ideal for status feedback in motor starter panels
• Used with control relays for industrial automation interlocks
• Can be used for lamp or PLC signalling in switchgear
How are conductors terminated into the unit?
Terminals accept flexible conductors with ferrules and rigid solid wires within the specified cross-section ranges and are tightened using a screw terminal.
What short-time withstand capability does it offer?
It withstands short-time currents with defined values for 0.1 s and 1 s durations to handle transient switching stresses.
What protection level do the auxiliary terminals provide?
The auxiliary terminals meet IP20 for Basic finger protection when installed in typical control enclosures.
Which tightening torque should be used on the terminals?
Terminal screws are secured to the manufacturer-specified torque to ensure proper electrical contact and mechanical retention.
Standards
UL 508, CSA C22.2 N14
Gerelateerde Links
- ABB Auxiliary Contact 4 NC Front 600 V dc 1SBN010140R1004 CA4-04E
- ABB Auxiliary Contact 4 NC Front 600 V dc 1SBN010140R1104 CA4-04M
- ABB Auxiliary Contact 1 NC Front 600 V dc 1SBN010110R1001 CA4-01
- ABB Auxiliary Contact 1 NC Front 600 V dc 1SBN010110T1001 CA4-01-T
- ABB Auxiliary Contact 2 NC/2 NO Front 600 V dc 1SBN010140R1322 CA4-22U
- ABB Auxiliary Contact 2 NC/2 NO Front 600 V dc 1SBN010140R1022 CA4-22E
- ABB Auxiliary Contact 3 NO/1 NC Front 600 V dc 1SBN010140R1331 CA4-31U
- ABB Auxiliary Contact 1 NO/3 NC Front 600 V dc 1SBN010140R1113 CA4-13M