FAG 6317-2RSR-C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- RS-stocknr.:
- 310-340
- Fabrikantnummer:
- 6317-2RSR-C3
- Fabrikant:
- FAG
Subtotaal (1 eenheid)*
€ 318,41
(excl. BTW)
€ 385,28
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 04 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 318,41 |
*prijsindicatie
- RS-stocknr.:
- 310-340
- Fabrikantnummer:
- 6317-2RSR-C3
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 85mm | |
| Outside Diameter | 180mm | |
| Race Width | 41mm | |
| Cage Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 97000N | |
| Dynamic Load Rating | 141000N | |
| Series | 63 | |
| Standards/Approvals | ISO 492:2023 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 2350rpm | |
| Bearing Type | Deep Groove | |
| Race Type | Deep Grooved | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 85mm | ||
Outside Diameter 180mm | ||
Race Width 41mm | ||
Cage Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 97000N | ||
Dynamic Load Rating 141000N | ||
Series 63 | ||
Standards/Approvals ISO 492:2023 | ||
Bore Type Cylindrical | ||
Limiting Speed 2350rpm | ||
Bearing Type Deep Groove | ||
Race Type Deep Grooved | ||
Vrijgesteld
- Land van herkomst:
- DE
Schaeffler Series 63 Deep Groove Ball Bearing, 85mm Bore, 180mm Outside Diameter - 6317-2RSR-C3
This deep groove ball bearing is designed to support radial and moderate axial loads in rotating equipment. It features a sealed end construction and a cylindrical bore, suitable for installations where exclusion of contamination is required. The component conforms to current dimensional standards and is intended for applications demanding defined internal clearance and controlled rotational speed.
Features and Benefits:
• Single-row design provides straightforward installation and alignment
• C3 internal clearance allows for thermal expansion compensation
• Steel cage offers sustained structural support under load
• 141,000 N dynamic capacity enables sustained operational loads
• Sealed ends reduce ingress of contaminants during service
• C3 internal clearance allows for thermal expansion compensation
• Steel cage offers sustained structural support under load
• 141,000 N dynamic capacity enables sustained operational loads
• Sealed ends reduce ingress of contaminants during service
Applications
• Suitable for industrial drives with controlled rotational speed
• Ideal for gearboxes requiring sealed bearing arrangements
• Used with shafts requiring a cylindrical bore mounting
• Can be used for rotating assemblies subject to high dynamic loads
• Ideal for gearboxes requiring sealed bearing arrangements
• Used with shafts requiring a cylindrical bore mounting
• Can be used for rotating assemblies subject to high dynamic loads
What is the bearings permitted rotational speed?
The limiting speed is 2,350 r/min, which defines the maximum recommended shaft speed for operation.
How does the bearing cope with static loads at standstill?
The static load rating is 97,000 N, indicating its capacity to withstand heavy stationary loads without permanent deformation.
What standard ensures dimensional interchangeability?
It is manufactured to ISO 492:2023, which governs geometry and tolerances for this type of component.
What materials and clearances affect thermal and mechanical performance?
The cage is MADE of steel and the internal clearance is specified as C3 to accommodate thermal growth and shaft-fit variations.
Gerelateerde Links
- FAG 6317-2RSR 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- FAG 6317-M-C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- FAG 6317-J20AA-C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- FAG 6317 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- FAG 6317-C4 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- FAG 6024-2RSR-C3 1 Row Deep Groove Ball Bearing - 120 mm ID, 180 mm OD
- SKF 6317-2RS1/C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
- SKF 6317-2Z/C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD
