FAG 695-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 13 mm OD

RS-stocknr.:: 312-894
Fabrikantnummer:: 695-2Z-HLC
Fabrikant:: FAG

FAG 695-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 13 mm OD

Bekijk alle Ball Bearings

Subtotaal (1 verpakking van 10 eenheden)*

€ 113,34

(excl. BTW)

€ 137,14

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 10 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Verpakking(en)	Per verpakking	Per stuk*
1 +	€ 113,34	€ 11,334

*prijsindicatie

RS-stocknr.:: 312-894
Fabrikantnummer:: 695-2Z-HLC
Fabrikant:: FAG

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	FAG
	Inside Diameter	5mm
	Product Type	Deep Groove Ball Bearing
	Outside Diameter	13mm
	Race Width	4mm
	Cage Material	Steel Sheet Metal
	Ball Material	Steel
	Race Material	Bearing Steel
	End Type	Shielded
	Number of Rows	1
	Static Load Rating	430N
	Internal Clearance	CN
	Dynamic Load Rating	1.08N
	Bore Type	Cylindrical
	Standards/Approvals	RoHS
	Series	695-2Z-HLC
	Limiting Speed	63rpm
	Race Type	Deep Groove
	Bearing Type	Single Row Deep Groove Ball
	Flange Outside Diameter	13mm

	Alles selecteren
	Merk FAG
	Inside Diameter 5mm
	Product Type Deep Groove Ball Bearing
	Outside Diameter 13mm
	Race Width 4mm
	Cage Material Steel Sheet Metal
	Ball Material Steel
	Race Material Bearing Steel
	End Type Shielded
	Number of Rows 1
	Static Load Rating 430N
	Internal Clearance CN
	Dynamic Load Rating 1.08N
	Bore Type Cylindrical
	Standards/Approvals RoHS
	Series 695-2Z-HLC
	Limiting Speed 63rpm
	Race Type Deep Groove
	Bearing Type Single Row Deep Groove Ball
	Flange Outside Diameter 13mm

Datasheet - 695-2Z-HLC

Land van herkomst:: CN

Schaeffler 695-2Z-HLC Series Deep Groove Ball Bearing, 5mm Bore Diameter, 13mm Outside Diameter - 695-2Z-HLC

This deep groove ball bearing is designed to support radial and axial loads in rotating assemblies where sealed operation and grease lubrication are required. It incorporates non-contact shields on both sides and a steel sheet-metal cage, offering maintenance‑friendly performance across a broad temperature range and standard internal clearance for typical industrial duty.

Features and Benefits:

• Steel sheet-metal cage reduces risk of cage deformation
• Sealed both sides prevents external contamination ingress
• Normal internal clearance CN allows controlled radial play
• Grease-filled for lifetime lubrication and low upkeep
• Rated dynamic load 1,080 N supports continuous radial stresses
• Operating temperature range −30°C to 120°C enables varied environments

Applications

• Suitable for Compact electric motors and small drives
• Ideal for precision instrumentation rotating shafts
• Used with handheld power tools requiring sealed bearings
• Can be used for conveyor idler rollers in light industry
• Used for hobbyist robotics and small automation axes

What shaft and housing shoulder limits must be observed?

Minimum shaft shoulder diameter is 6.4 mm and maximum housing shoulder diameter is 11.6 mm.

How does the bearing perform at elevated temperatures?

Dimensional stability of rings is maintained up to 120°C and lubricant suitability extends operation to that limit.

What are the load ratings relevant to fatigue and static conditions?

The fatigue load limit is 17.5 N and the Basic static radial load rating is 430 N.

What rotational speed capability does it offer?

The limiting speed is 63,000 rpm for applications within the specified lubrication and temperature range.