SKF 6214-2RS1/HC5C3WT 1 Row Ball Bearing - 70 mm ID, 125 mm OD

Subtotaal (1 eenheid)*

€ 1.093,64

(excl. BTW)

€ 1.323,30

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Voorradig bij de fabrikant
  • Klaar voor verzending vanaf 22 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 1.093,64

*prijsindicatie

RS-stocknr.:
462-612
Fabrikantnummer:
6214-2RS1/HC5C3WT
Fabrikant:
SKF
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SKF

Inside Diameter

70mm

Product Type

Ball Bearing

Outside Diameter

125mm

Race Width

24mm

Cage Material

Sheet Metal

Ball Material

Ceramic

End Type

Sealed

Number of Rows

1

Static Load Rating

45kN

Internal Clearance

C3

Dynamic Load Rating

60.5kN

Standards/Approvals

No

Series

6214

Bore Type

Cylindrical

Limiting Speed

3400rpm

Bearing Type

Deep Groove Ball

Land van herkomst:
FR

SKF 6214 Series Ball Bearing, 70mm Inside Diameter, 125mm Outside Diameter - 6214-2RS1/HC5C3WT


This ball bearing is a sealed deep-groove unit designed to support radial and light axial loads in rotating assemblies. It uses ceramic rolling elements and a sheet-metal cage to reduce friction and sustain operation in applications requiring moderate speeds and robust load capacity. The sealed construction helps retain lubrication and limit contamination for continued operation in industrial environments.

Features and Benefits:


• Low-friction ceramic rolling elements increase operational efficiency • Sealed end configuration reduces ingress of contaminants • Internal clearance set to C3 compensates for thermal expansion • Dynamic load rating of 60.5 kN supports heavy radial stresses • Static load capacity of 45 kN resists shock and standstill loads • Limiting speed rated at 3,400 r/min permits high-speed operation

Applications


• Suitable for precision motor shafts in automation equipment • Ideal for spindle support in Electronic Assembly machinery • Used for rotor bearings in electrical drive systems • Can be used for actuator pivots in mechanical automation

What material is used for the rolling elements and why does it matter?


Ceramic balls are employed to reduce contact friction and wear, improving efficiency and heat resistance compared with steel under similar conditions.

How does the cage construction affect performance?


The sheet-metal cage provides reliable ball spacing at elevated rotational speeds while offering a good strength-to-weight ratio and dimensional stability.

What does the internal clearance specification indicate for assembly?


The HC5C3 clearance designation means the bearing has increased internal clearance to accommodate shaft expansion and maintain acceptable running clearance during thermal variation.

How should this bearing be considered for maintenance scheduling?


Sealed ends reduce routine re-lubrication frequency, so inspection intervals can focus on vibration and temperature monitoring to determine service needs.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.