SKF 3200 A-2RS1TN9/MT33 2 Row Ball Bearing - 10 mm ID, 30 mm OD 14 mm Race Width
- RS-stocknr.:
- 505-596
- Fabrikantnummer:
- 3200 A-2RS1TN9/MT33
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 48,59
(excl. BTW)
€ 58,79
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 6 stuk(s) vanaf 28 september 2026
- Plus verzending 2 stuk(s) vanaf 28 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 48,59 |
| 5 - 9 | € 46,66 |
| 10 - 24 | € 45,68 |
| 25 + | € 44,70 |
*prijsindicatie
- RS-stocknr.:
- 505-596
- Fabrikantnummer:
- 3200 A-2RS1TN9/MT33
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 10mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 30mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| End Type | Sealed | |
| Number of Rows | 2 | |
| Static Load Rating | 4.3kN | |
| Contact Angle | 30° | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 7.61kN | |
| Standards/Approvals | No | |
| Series | 2 Light | |
| Bore Type | Parallel | |
| Limiting Speed | 17000rpm | |
| Race Type | Plain | |
| Bearing Type | Double Row Angular Contact Ball | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 10mm | ||
Product Type Ball Bearing | ||
Outside Diameter 30mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
End Type Sealed | ||
Number of Rows 2 | ||
Static Load Rating 4.3kN | ||
Contact Angle 30° | ||
Internal Clearance CN | ||
Dynamic Load Rating 7.61kN | ||
Standards/Approvals No | ||
Series 2 Light | ||
Bore Type Parallel | ||
Limiting Speed 17000rpm | ||
Race Type Plain | ||
Bearing Type Double Row Angular Contact Ball | ||
Vrijgesteld
SKF Plain Angular Contact Ball Bearing, 10mm ID, 30mm OD - 3200A-2RS1TN9/MT33
Use this double-row angular contact ball bearing from SKF to accommodate radial and axial loads moving in either direction. Because its inner and outer raceways are offset, they can offer reliable support for combined loads. The ground transition from raceway to shoulder reduces edge stresses, which means the bearing can handle increased thrust loads. An enhanced crown cage design provides better ball guidance and reduces friction, allowing for a higher speed rating. At the same time, noise, vibration and heat generation are reduced. The result is a longer-lasting, high-performing bearing.
• Built from ultra-clean steel and heat-processed for enhanced hardness and durability
• Fibreglass reinforced nylon 66 (polyamide nylon) cage material offers greater self-lubricating capacity and higher elasticity
• Provides high-performance in a range of demanding industrial environments at temperatures up to +150°C
• Upgraded balls reduce lubricant consumption and help extend the life of the bearing
Applications
• Gears and transmission systems
• Fans and blowers
• Industrial pumps
Does this bearing pose any danger of electrostatic discharge?
No. This component has been thoroughly tested for quality and meets all British and European electrostatic discharge and safety standards.
Gerelateerde Links
- SKF 3205 A-2RS1TN9/MT33 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3204 A-2RS1TN9/MT33 2 Row Ball Bearing - 20 mm ID, 47 mm OD 20.6 mm Race Width
- SKF 3206 A-2RS1TN9/MT33 2 Row Ball Bearing - 30 mm ID, 62 mm OD 23.8 mm Race Width
- SKF 3203 A-2RS1TN9/MT33 2 Row Ball Bearing - 17 mm ID, 40 mm OD 17.5 mm Race Width
- SKF 3209 A-2RS1TN9/MT33 2 Row Ball Bearing - 45 mm ID, 85 mm OD 30.2 mm Race Width
- SKF 3304 A-2RS1TN9/MT33 2 Row Ball Bearing - 20 mm ID, 52 mm OD 22.2 mm Race Width
- SKF 3306 A-2RS1TN9/MT33 2 Row Ball Bearing - 30 mm ID, 72 mm OD 30.2 mm Race Width
- SKF 3302 A-2RS1TN9/MT33 2 Row Ball Bearing - 15 mm ID, 42 mm OD 19 mm Race Width