SKF 2303 E-2RS1TN9 17 mm ID 2 Row Ball Bearing -, 47 mm OD
- RS-stocknr.:
- 505-738
- Fabrikantnummer:
- 2303 E-2RS1TN9
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 68,15
(excl. BTW)
€ 82,46
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 9 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 68,15 |
| 5 - 9 | € 65,44 |
| 10 - 24 | € 64,05 |
| 25 + | € 62,72 |
*prijsindicatie
- RS-stocknr.:
- 505-738
- Fabrikantnummer:
- 2303 E-2RS1TN9
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 47mm | |
| Race Width | 19mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| Number of Rows | 2 | |
| Internal Clearance | CN | |
| Static Load Rating | 3.4kN | |
| Dynamic Load Rating | 12.7kN | |
| Bore Type | Taper | |
| Series | 2303 E-2RS1TN9 | |
| Standards/Approvals | No | |
| Limiting Speed | 11000rpm | |
| Race Type | Plain | |
| Bearing Type | Self-Aligning | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 47mm | ||
Race Width 19mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
Number of Rows 2 | ||
Internal Clearance CN | ||
Static Load Rating 3.4kN | ||
Dynamic Load Rating 12.7kN | ||
Bore Type Taper | ||
Series 2303 E-2RS1TN9 | ||
Standards/Approvals No | ||
Limiting Speed 11000rpm | ||
Race Type Plain | ||
Bearing Type Self-Aligning | ||
Vrijgesteld
SKF Self-Aligning Ball Bearing, 17mm ID, 47mm OD - 2303E-2RS1TN9
This ball bearing from SKF is self-adjusting to accommodate both static and dynamic shaft misalignment. It's a good choice for light-load to medium-load conveyor applications, thanks to its high-speed ability and low maintenance needs. It handles varying loads well and with minimal friction, which allows for improved conveyor speeds and a longer service life. The bearing's low minimum load requirements virtually eliminate sliding during start-up and light-load conditions, which reduces the risk of damage and enhances its reliability.
• Nitrile rubber sealing rings are resistant to oil and hard-wearing for use in harsh working conditions
• Sealed for life so never needs to be re-lubricated for reduced downtime
• Wide operating temperature range of -40°C to +100°C for use in demanding industrial environments
• Reduced vibration and noise for improved efficiency and workforce comfort
Applications
• Take-up pulleys
• Automated assembly lines
• Material handling and packing
Does this bearing run cool at high speeds?
Yes, this self-aligning ball bearing maintains a low operating temperature, even in high-speed applications. This is thanks to low friction generation, which also allows you to extend the time between maintenance.