SKF 1208EKTN9 Self Aligning Ball Bearing- Open Type 40mm I.D, 80mm O.D
- RS-stocknr.:
- 506-432
- Fabrikantnummer:
- 1208EKTN9
- Fabrikant:
- SKF
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-05-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 44,02
(excl. BTW)
€ 53,26
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 44,02 |
| 5 - 9 | € 42,26 |
| 10 - 24 | € 41,39 |
| 25 + | € 40,50 |
- RS-stocknr.:
- 506-432
- Fabrikantnummer:
- 1208EKTN9
- Fabrikant:
- SKF
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- SE
Productomschrijving
Double Row Self - Aligning
Radial Self-Aligning Ball Bearing
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).
Open Bearings
ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.
Sealed bearings
2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.
TN suffix denotes polyamide cage
Supplied with
instruction leaflet.
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 40mm |
| Outside Diameter | 80mm |
| Race Width | 18mm |
| Ball Bearing Type | Self Aligning Ball Bearing |
| Sealing Arrangement | Open Type |
| Bearing Clearance | CN |
| Material | Steel |
| Ball Material | Steel |
| Cage Material | Non-metallic |
| Number of Rows | 2 |
| Static Load Rating | 6.95kN |
| Dynamic Load Rating | 19.9kN |
| Bore Type | Tapered |
| Bearing Series | 2 Light |
| Partial Bearing Code | 1208 |
| Race Type | Plain |