SKF 6307-2Z/C3GJN 1 Row Deep Groove Ball Bearing - 35 mm ID, 80 mm OD
- RS-stocknr.:
- 123-4839
- Fabrikantnummer:
- 6307-2Z/C3GJN
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 61,31
(excl. BTW)
€ 74,19
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 08 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 61,31 |
| 5 - 9 | € 58,86 |
| 10 - 24 | € 57,62 |
| 25 + | € 56,38 |
*prijsindicatie
- RS-stocknr.:
- 123-4839
- Fabrikantnummer:
- 6307-2Z/C3GJN
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 35mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 80mm | |
| Race Width | 21mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Static Load Rating | 19kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 35.1kN | |
| Standards/Approvals | No | |
| Series | 6307-2Z | |
| Bore Type | Cylindrical | |
| Limiting Speed | 9500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 35mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 80mm | ||
Race Width 21mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Static Load Rating 19kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 35.1kN | ||
Standards/Approvals No | ||
Series 6307-2Z | ||
Bore Type Cylindrical | ||
Limiting Speed 9500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
SKF 6307-2Z Series Deep Groove Ball Bearing, 35mm Inside Diameter, 80mm Outside Diameter - 6307-2Z/C3GJN
This deep groove ball bearing is designed to support radial loads and operate reliably in rotating equipment common to automation and electrical systems. It features shields to limit contamination ingress and a cylindrical bore to suit straightforward mounting. The bearing is intended for single-row applications where steady rotation and ease of installation are required.
Features and Benefits:
• Shielded design reduces contaminant entry for extended service life
• Steel balls enable Durable rolling contact with minimal deformation
• Sheet metal cage maintains precise ball spacing at high speeds
• C3 internal clearance accommodates thermal expansion in tight fits
• Rated for 9,500 r/min to support high-speed motor applications
• Dynamic capacity of 35.1 kN resists fatigue under fluctuating loads
• Steel balls enable Durable rolling contact with minimal deformation
• Sheet metal cage maintains precise ball spacing at high speeds
• C3 internal clearance accommodates thermal expansion in tight fits
• Rated for 9,500 r/min to support high-speed motor applications
• Dynamic capacity of 35.1 kN resists fatigue under fluctuating loads
Applications
• Suitable for electric motor rotor support in drives and pumps
• Ideal for conveyor rollers in automated assembly lines
• Used with spindle housings requiring Compact radial bearings
• Can be used for gearboxes where shielded protection is needed
• Suitable for fan and blower shafts in ventilation systems
• Ideal for conveyor rollers in automated assembly lines
• Used with spindle housings requiring Compact radial bearings
• Can be used for gearboxes where shielded protection is needed
• Suitable for fan and blower shafts in ventilation systems
How does the bore type affect mounting options?
A cylindrical bore permits straightforward press-fit or slip-fit mounting depending on shaft tolerance and does not require adaptor sleeves.
What does the shielded end type mean for maintenance intervals?
Shields reduce ingress of dust and debris, typically extending inspection intervals compared with open bearings while still allowing relubrication through appropriate procedures.
How should internal clearance C3 influence assembly decisions?
C3 clearance provides extra internal axial freedom to compensate for operating temperature rises or shaft expansion in interference fits, preventing preload increase.
What operational limits are indicated by the static rating?
The 19 kN static load rating defines the maximum load the bearing can withstand without excessive permanent deformation when stationary or under slow rotation.
How does the cage material impact performance in high-speed uses?
A sheet metal cage offers low mass and stable ball guidance, reducing centrifugal distortion and helping maintain rotational stability at elevated speeds.
Gerelateerde Links
- SKF 6307-2Z 1 Row Ball Bearing - 35 mm ID, 80 mm OD
- SKF 6307-2Z/C3 1 Row Ball Bearing - 35 mm ID, 80 mm OD
- SKF 6307-2Z/VA208 1 Row Deep Groove Ball Bearing - 35 mm ID, 80 mm OD
- FAG 6307-2Z 1 Row Ball Bearing - 35 mm ID, 80 mm OD
- FAG 6307-2Z-C3 1 Row Ball Bearing - 35 mm ID, 80 mm OD
- RS PRO 6307-2Z 1 Row Ball Bearing - 35 mm ID, 80 mm OD
- SKF 6202-2Z/C3GJN 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6207-2Z/C3GJN 1 Row Ball Bearing - 35 mm ID, 72 mm OD