NSK BSF40115DDUHP2B R BE4L5 2 Row Ball Screw Support Bearing - 40 mm ID, 115 mm OD 46 mm Race Width

RS-stocknr.:: 126-6946
Fabrikantnummer:: BSF40115DDUHP2B R BE4L5
Fabrikant:: NSK

NSK BSF40115DDUHP2B R BE4L5 2 Row Ball Screw Support Bearing - 40 mm ID, 115 mm OD 46 mm Race Width

Afbeelding representeert productcategorie

Bekijk alle Ball Bearings

Subtotaal (1 eenheid)*

€ 440,12

(excl. BTW)

€ 532,55

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 10 juni 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 440,12

*prijsindicatie

RS-stocknr.:: 126-6946
Fabrikantnummer:: BSF40115DDUHP2B R BE4L5
Fabrikant:: NSK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	NSK
	Inside Diameter	40mm
	Product Type	Ball Screw Support Bearing
	Outside Diameter	115mm
	Race Width	46mm
	Ball Material	Steel
	Cage Material	Steel
	End Type	Sealed
	Number of Rows	2
	Static Load Rating	135kN
	Contact Angle	60°
	Internal Clearance	CN
	Dynamic Load Rating	75kN
	Series	BSF
	Standards/Approvals	No
	Bore Type	Parallel
	Limiting Speed	3100rpm
	Bearing Type	Single Row Angular Contact Ball
	Flange Outside Diameter	115mm
	Race Type	Flanged

	Alles selecteren
	Merk NSK
	Inside Diameter 40mm
	Product Type Ball Screw Support Bearing
	Outside Diameter 115mm
	Race Width 46mm
	Ball Material Steel
	Cage Material Steel
	End Type Sealed
	Number of Rows 2
	Static Load Rating 135kN
	Contact Angle 60°
	Internal Clearance CN
	Dynamic Load Rating 75kN
	Series BSF
	Standards/Approvals No
	Bore Type Parallel
	Limiting Speed 3100rpm
	Bearing Type Single Row Angular Contact Ball
	Flange Outside Diameter 115mm
	Race Type Flanged

Datasheet - BSF40115DDUHP2B

Ball Screw Support Bearings - BSF Series

The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during operation if necessary. The holes are closed off with set screws. An extraction groove on the outer surface of the outer ring aids removal of the bearing.

BSF-DT Series

The matched DT pairs are essentially the same as the individual bearings. The two individual bearings have been matched together in the paired version. Some sizes also have extra fixing holes in the outer diameter. Both bearings have a V-shaped mark on the outer diameter to ensure that they are arranged correctly.

Features and Benefits

• 60° Contact angle enabling the bearings to support large axial forces

• Double row to support axial force in two directions

• Contact lip seal provides excellent sealing with low friction and heat generation

• Greased for life (under normal operating conditions)

• Easy mounting directly onto machinery

• Extraction groove to aid with removal

• Set screws

Product Application Information

Ideal for use in machine tools.