FAG 6306-C-2Z 1 Row Ball Bearing - 30 mm ID, 72 mm OD

This ball bearing is designed for high performance in various applications, featuring an inner diameter of 30mm and an outer diameter of 72mm. The single row deep groove type ensures effective operation under varying load conditions. With a race width of 19mm, this component is suitable for numerous mechanical assemblies, offering robust support in demanding environments.

• Shielded on both sides for enhanced protection against debris

• Used in automation systems requiring precise movement

The static load rating is 16.2kN, and the dynamic load rating is 33.5kN. These ratings indicate the maximum loads the bearing can support without failure, ensuring safe operation under specific conditions.

The shielded design prevents contaminants from entering the bearing, reducing wear and tear, which contributes to a longer service life and more reliable performance in adverse environments.

This type allows for efficient handling of radial and axial loads in both directions, enhancing versatility in various applications, which is essential for machinery that experiences fluctuating loads.

FAG from Schaeffler deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. These products are of simple design, durable in operation and easy to maintain. They are available in single and double row designs and in open and sealed variants. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields.

• Low noise levels;• Improved sealing;• Lower friction;• Cost-effective

Open bearings are suitable for high speeds. Due to the manufacturing process, they have turned recesses for sealing washers and sealing shields.

2Z - Gap seals on both sides. These bearings are greased using a high-quality grease, lubricated for life and suitable for high speeds;2HRS - Lip seals on both sides made from nitrile butadiene rubber. These bearings have an improved sealing function and retention in the outer ring. They are greased using a high-quality grease, lubricated for life and suitable for moderate speeds;2BRS - Non-contact seals on both sides. Their friction level is as low as with the gap seals. In addition, they offer better protection against the ingress of dust and the escape of lubricant;2RSR - Lip seals on both sides made from nitrile butadiene rubber NBR and are suitable for moderate speeds;C - Modified internal construction in Generation C