FAG 6004-C-C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- RS-stocknr.:
- 190-8391
- Fabrikantnummer:
- 6004-C-C3
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 5,38
(excl. BTW)
€ 6,51
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 05 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 5,38 |
| 5 - 9 | € 5,16 |
| 10 - 24 | € 5,04 |
| 25 + | € 4,96 |
*prijsindicatie
- RS-stocknr.:
- 190-8391
- Fabrikantnummer:
- 6004-C-C3
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Inside Diameter | 20 mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 42 mm | |
| Race Width | 12mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 5kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 10kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 0 Extra Light | |
| Limiting Speed | 27500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Inside Diameter 20 mm | ||
Product Type Ball Bearing | ||
Outside Diameter 42 mm | ||
Race Width 12mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 5kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 10kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 0 Extra Light | ||
Limiting Speed 27500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Gerelateerde Links
- FAG 6004-C-2Z-C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG 6004-C-2HRS-C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG 6004-C-2Z-C3>V 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG 6004-C 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG 6004-C-2HRS 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- SKF 6004/C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- SKF 6004-2RSH/C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- SKF 6004-Z/C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD