INA 6207-C-C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- RS-stocknr.:
- 191-3844
- Fabrikantnummer:
- 6207-C-C3
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 12,59
(excl. BTW)
€ 15,23
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 12,59 |
| 5 - 9 | € 12,10 |
| 10 - 24 | € 11,83 |
| 25 + | € 11,57 |
*prijsindicatie
- RS-stocknr.:
- 191-3844
- Fabrikantnummer:
- 6207-C-C3
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Ball Bearing | |
| Inside Diameter | 35mm | |
| Outside Diameter | 72mm | |
| Race Width | 17mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 15.4kN | |
| Dynamic Load Rating | 28kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 2 Light | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Ball Bearing | ||
Inside Diameter 35mm | ||
Outside Diameter 72mm | ||
Race Width 17mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 15.4kN | ||
Dynamic Load Rating 28kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 2 Light | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Gerelateerde Links
- INA 6207-C 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- FAG 6207-C-2Z-C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- FAG 6207-C-2HRS-C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207-2RS1/C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207-2Z/C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207-Z/C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207 NR/C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- FAG 6207-2RSR-C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD