SKF 6014/C3 1 Row Ball Bearing - 70 mm ID, 110 mm OD

This ball bearing is a single-row deep-groove component designed to support radial and axial loads in rotating equipment. It features steel rolling elements and an open-end arrangement for straightforward installation and inspection. The bearing is intended for industrial applications where controlled internal clearance and a cylindrical bore are required for shaft-fitting operations.

• Sheet-metal cage reduces mass while maintaining ball spacing
• C3 internal clearance accommodates thermal expansion during operation
• Dynamic capacity 39.7 kN delivers sustained load endurance
• Static capacity 31 kN supports heavy static or shock loads
• Limiting speed 8,000 r/min enables high-speed rotation
• Open-ended construction allows easy Visual inspection

• Suitable for general-purpose industrial rotating shafts
• Used with precision shafts requiring cylindrical bores
• Ideal for machines needing high-speed bearing solutions
• Can be used for equipment exposed to thermal variation
• Used for assemblies where routine inspection is required

It employs a cylindrical bore that fits directly onto straight shafts without taper adapters.

The sheet-metal cage provides low inertia and consistent ball separation for stable operation at elevated speeds.

The C3 clearance compensates for dimensional changes from heat and allows safe operation under thermal growth.

Compare the 31 kN static and 39.7 kN dynamic values to expected service loads to ensure adequate margin for both stationary and running conditions.