SKF 6212-Z/C4 1 Row Ball Bearing - 60 mm ID, 110 mm OD

This ball bearing is a single-row deep-groove component designed to support radial and axial loads in rotating assemblies. It uses steel rolling elements and a cylindrical bore to integrate with shafts, and is supplied with shields to reduce contamination ingress while maintaining rotational access. The internal clearance is set to a larger tolerance to accommodate thermal expansion and shaft deflection in demanding operating conditions.

• Sheet-metal cage reduces rotational friction and limits mass
• Shielded ends Block debris while allowing lubricated operation
• Internal clearance C4 compensates for thermal growth
• Dynamic load capacity 55.3 kN sustains fluctuating operational forces
• Static load capacity 36 kN resists heavy stationary loads

• Suitable for medium-duty electric motor spindles
• Used with gearbox input shafts requiring axial support
• Ideal for conveyor roller systems under varying loads
• Can be used for pump-shaft support in industrial plants
• Used for rotating assemblies needing higher internal clearance

It is rated for operation up to 8,000 r/min.

Both the balls and raceways are manufactured from steel.

It features a cylindrical bore intended for press or slip fit onto shafts with appropriate seating methods.

A sheet-metal cage is employed to provide low inertia and stable ball spacing at speed.

The shields reduce contamination ingress, which can extend relubrication intervals compared with open bearings.