SKF 61816 1 Row Deep Groove Ball Bearing - 80 mm ID, 100 mm OD
- RS-stocknr.:
- 207-6987
- Fabrikantnummer:
- 61816
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 156,23
(excl. BTW)
€ 189,04
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 156,23 |
*prijsindicatie
- RS-stocknr.:
- 207-6987
- Fabrikantnummer:
- 61816
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 80mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 100mm | |
| Race Width | 10mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 11.2kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 12.7kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | 61816 | |
| Limiting Speed | 8000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 80mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 100mm | ||
Race Width 10mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 11.2kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 12.7kN | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series 61816 | ||
Limiting Speed 8000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- Land van herkomst:
- FR
SKF 61816 Series Deep Groove Ball Bearing, 80mm Inside Diameter, 100mm Outside Diameter - 61816
This deep-groove ball bearing serves as a running element for rotary assemblies in automation, electrical and mechanical equipment, providing smooth radial support in medium-speed applications. It is an open-ended, single-row design with a cylindrical inner bore and steel rolling elements guided by a sheet-metal retaining cage, intended for environments where straightforward assembly and reliable rotation are required.
Features and Benefits:
• Dynamic load capacity 12.7 kN for sustained operational loads
• Static load capacity 11.2 kN to resist stationary forces
• Limiting speed 8,000 r/min for moderate to high-speed shafts
• Internal clearance CN to accommodate thermal and alignment variations
• Single-row geometry for Compact radial support
• Open-end configuration for straightforward inspection and lubrication
• Static load capacity 11.2 kN to resist stationary forces
• Limiting speed 8,000 r/min for moderate to high-speed shafts
• Internal clearance CN to accommodate thermal and alignment variations
• Single-row geometry for Compact radial support
• Open-end configuration for straightforward inspection and lubrication
Applications
• Suitable for motor shafts in industrial automation modules
• Ideal for spindle support in Electronic Assembly machinery
• Used with gearboxes in electrical drive units
• Can be used for pulley and conveyor idler shafts in mechanical systems
• Ideal for spindle support in Electronic Assembly machinery
• Used with gearboxes in electrical drive units
• Can be used for pulley and conveyor idler shafts in mechanical systems
What material are the rolling elements MADE from?
The balls are manufactured from steel, offering hardness and fatigue resistance suitable for typical rotating applications.
How does the cage influence maintenance intervals?
The sheet-metal cage provides reliable ball separation with low debris accumulation, simplifying Visual inspection and routine relubrication.
What bore form is required on mating shafts?
A cylindrical bore is specified, so shafts should be machined and toleranced for a plain journal fit consistent with press or slip-fit assembly methods.
How does the open end affect lubrication options?
The open design permits direct application of lubricants and Visual checks, facilitating periodic relubrication without disassembly.
Which operating condition dictates clearance selection?
The CN internal clearance suits assemblies where moderate shaft growth and misalignment must be accommodated without excessive endplay.
Gerelateerde Links
- FAG 61816-Y-C3 1 Row Deep Groove Ball Bearing - 80 mm ID, 100 mm OD
- SKF 61816-2RZ 1 Row Ball Bearing - 80 mm ID, 100 mm OD
- SKF 61816-2RS1 1 Row Ball Bearing - 80 mm ID, 100 mm OD
- SKF 6016 1 Row Deep Groove Ball Bearing - 80 mm ID, 125 mm OD
- SKF 6405/C3 1 Row Deep Groove Ball Bearing - 25 mm ID, 80 mm OD
- SKF 63010-2RS1 1 Row Deep Groove Ball Bearing - 50 mm ID, 80 mm OD
- SKF 6216-2RS1 1 Row Deep Groove Ball Bearing - 80 mm ID, 140 mm OD
- SKF 6307 NR 1 Row Deep Groove Ball Bearing - 35 mm ID, 80 mm OD