SKF 1224 KM/C3 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- RS-stocknr.:
- 209-1784
- Fabrikantnummer:
- 1224 KM/C3
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 1.401,41
(excl. BTW)
€ 1.695,71
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 25 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1.401,41 |
*prijsindicatie
- RS-stocknr.:
- 209-1784
- Fabrikantnummer:
- 1224 KM/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 120mm | |
| Outside Diameter | 215mm | |
| Race Width | 42mm | |
| Cage Material | Machined Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 2 | |
| Internal Clearance | C3 | |
| Static Load Rating | 53kN | |
| Dynamic Load Rating | 119kN | |
| Standards/Approvals | No | |
| Series | Self-aligning ball bearings | |
| Bore Type | Tapered | |
| Limiting Speed | 4000rpm | |
| Bearing Type | Self-Aligning | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 120mm | ||
Outside Diameter 215mm | ||
Race Width 42mm | ||
Cage Material Machined Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 2 | ||
Internal Clearance C3 | ||
Static Load Rating 53kN | ||
Dynamic Load Rating 119kN | ||
Standards/Approvals No | ||
Series Self-aligning ball bearings | ||
Bore Type Tapered | ||
Limiting Speed 4000rpm | ||
Bearing Type Self-Aligning | ||
- Land van herkomst:
- MY
SKF Self Aligning Ball Bearing, 120 mm ID, 215 mm OD - 1224 KM/C3
Got a shaft that's difficult to align with its housing, or that's liable to bend during operation? This ball bearing from SKF is ideal to use in this situation, as it's not affected by the angular misalignment that can be caused by shaft deflection. Because it's self-aligning, it generates a minimal amount of friction during operation and remains cool even at high speeds. A bearing such as this one will give you a long service life in applications with a light axial load.
• Open end type allows for straightforward relubrication
• Tapered bore type enables the transfer of a load evenly while rolling
• Inside diameter of 120 mm and outside diameter of 215 mm, which are displaced relative to each other to accommodate combined loads
Application information
• Rotating machinery, such as stirrers and blenders
• Fans and blowers
• Intermediate shafts in vehicles
How do I mount a self-aligning bearing with a tapered bore?
Screw up the lock nut to the end of the indicated range. Remove the lock nut, then place the washer by securing the nut back on the sleeve. Bend one of the lock washer tabs into a matching slot on the nut.
Gerelateerde Links
- SKF 1224 KM 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 1224 M 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 2320 KM/C3 100 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 6224/C3 1 Row Ball Bearing - 120 mm ID, 215 mm OD
- SKF 2220 KM/C3 100 mm ID 2 Row Ball Bearing -, 180 mm OD
- SKF 2317 KM/C3 85 mm ID 2 Row Ball Bearing -, 180 mm OD
- SKF 2222 KM/C3 110 mm ID 2 Row Ball Bearing -, 200 mm OD
- SKF 2315 KM/C3 75 mm ID 2 Row Ball Bearing -, 160 mm OD