SKF 2213 EKTN9 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- RS-stocknr.:
- 209-1938
- Fabrikantnummer:
- 2213 EKTN9
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 137,51
(excl. BTW)
€ 166,39
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 2 stuk(s) vanaf 16 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 137,51 |
*prijsindicatie
- RS-stocknr.:
- 209-1938
- Fabrikantnummer:
- 2213 EKTN9
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 65mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 120mm | |
| Race Width | 31mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| End Type | Open | |
| Number of Rows | 2 | |
| Internal Clearance | CN | |
| Static Load Rating | 20kN | |
| Dynamic Load Rating | 57.2kN | |
| Bore Type | Tapered | |
| Standards/Approvals | No | |
| Series | Self-aligning ball bearings | |
| Limiting Speed | 7000rpm | |
| Bearing Type | Self-Aligning | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 65mm | ||
Product Type Ball Bearing | ||
Outside Diameter 120mm | ||
Race Width 31mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
End Type Open | ||
Number of Rows 2 | ||
Internal Clearance CN | ||
Static Load Rating 20kN | ||
Dynamic Load Rating 57.2kN | ||
Bore Type Tapered | ||
Standards/Approvals No | ||
Series Self-aligning ball bearings | ||
Limiting Speed 7000rpm | ||
Bearing Type Self-Aligning | ||
SKF Self-aligning ball bearings Series Ball Bearing, 65mm Inside Diameter, 7000RPM Limiting Speed - 2213 EKTN9
This ball bearing is a self-aligning rotary bearing designed to accommodate shaft misalignment while supporting radial loads in rotating machinery. It features a tapered bore and an open-end configuration, intended for installations where alignment correction and accessible assemblies are required.
Features and Benefits:
• Double-row layout increases load distribution capacity
• Steel balls provide predictable rolling-contact performance
• Non-metallic cage reduces internal friction and noise
• CN internal clearance allows for controlled axial displacement
• 7000 r/min limiting speed supports moderate rotational applications
• 57.2 kN dynamic load rating sustains heavy operational loads
• Steel balls provide predictable rolling-contact performance
• Non-metallic cage reduces internal friction and noise
• CN internal clearance allows for controlled axial displacement
• 7000 r/min limiting speed supports moderate rotational applications
• 57.2 kN dynamic load rating sustains heavy operational loads
Applications
• Suitable for agricultural machinery with alignment variance
• Ideal for conveyors requiring continuous radial support
• Used with gearboxes operating at moderate speeds
• Can be used for electric motor shafts with tapered adaptor
• Used for industrial fans where open-end access is needed
• Ideal for conveyors requiring continuous radial support
• Used with gearboxes operating at moderate speeds
• Can be used for electric motor shafts with tapered adaptor
• Used for industrial fans where open-end access is needed
What mounting arrangement does it accommodate for tapered shafts?
It accepts a tapered mounting sleeve or adaptor for a secure interference fit on tapered journals.
How does the clearance class affect axial movement?
The CN clearance provides a predefined internal gap that permits small axial displacement under thermal or load-induced changes.
What bearing characteristics determine its suitability for higher load cycles?
The double-row geometry combined with a 57.2 kN dynamic load rating increases fatigue life under repeated radial loading.
How does the cage material influence maintenance intervals?
A non-metallic cage typically reduces lubrication shear and wear rates, which can extend re-lubrication periods compared with metal cages.
What operating limitation should be observed regarding rotational speed?
Operation should not exceed the 7000 r/min limiting speed to avoid accelerated wear and potential performance loss.
Gerelateerde Links
- SKF 2213 EKTN9/C3 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 2213 ETN9 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 1213 EKTN9 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 2213 E-2RS1KTN9 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 2213 ETN9/C3 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 2213 E-2RS1TN9 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 1213 EKTN9/C3 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 2213 E-2RS1KTN9/C3 65 mm ID 2 Row Ball Bearing -, 120 mm OD