FAG 608-2Z-C3-HLN 1 Row Ball Bearing - 8 mm ID, 22 mm OD

Bekijk alle Ball Bearings

Subtotaal (1 verpakking van 10 eenheden)*

€ 42,49

(excl. BTW)

€ 51,41

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 60 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 4,249€ 42,49

*prijsindicatie

RS-stocknr.:
260-0563
Fabrikantnummer:
608-2Z-C3-HLN
Fabrikant:
FAG
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FAG

Inside Diameter

8mm

Product Type

Ball Bearing

Outside Diameter

22mm

Race Width

7mm

Ball Material

Steel

Cage Material

Steel

End Type

Closed

Number of Rows

1

Internal Clearance

C3

Static Load Rating

1.368kN

Dynamic Load Rating

3.297kN

Bore Type

Parallel

Standards/Approvals

No

Series

60

Limiting Speed

40000rpm

Race Type

Plain

Bearing Type

Single Row Deep Groove Ball

Vrijgesteld

Schaeffler Series 60 Ball Bearing, 8mm Inside Diameter, 22mm Outside Diameter - 608-2Z-C3-HLN


This ball bearing is a single-row deep-groove bearing designed to support radial loads in Compact rotating assemblies within automation, electronics and mechanical systems. It features metal shields on both sides and a parallel bore, enabling smooth rotation at high speeds while maintaining a Compact profile suited to tight housings.

Features & Benefits


• Limiting speed 40000 r/min enables high-speed operation
• Dynamic load capacity 3.297 kN increases service life under cyclic loads
• Static load rating 1.368 kN resists deformation during heavy stops
• Steel sheet cage provides robust retention at elevated rpm

**Applications**


• Suitable for high-speed motor spindles in automation equipment
• Ideal for rotary encoders and precision electromechanical actuators
• Used for fan and blower shafts in electronics cooling systems
• Can be used for small gearbox input shafts in machinery

What temperature range can it operate within?


It functions between -30°C and 120°C, covering typical industrial ambient and elevated operating temperatures.

How should shaft and housing fillets be managed during installation?


Maximum allowable fillet radius at seating faces is 0.3mm and minimum chamfer depth is 0.3mm to ensure correct seating and avoid ring interference.

What are the recommended maximum shoulder dimensions for mounting?


The shaft shoulder should be at least 10mm in diameter and the housing shoulder may be up to 20mm to maintain appropriate ring support.

How does the bearing behave under fatigue-limited operation?


The radial fatigue load limit is 74 N, indicating the threshold for long-term material endurance under repeated stress cycles.

Gerelateerde Links