FAG 6204-C-2HRS>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- RS-stocknr.:
- 260-0869
- Fabrikantnummer:
- 6204-C-2HRS>V
- Fabrikant:
- FAG
Subtotaal (1 eenheid)*
€ 7,69
(excl. BTW)
€ 9,30
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 99 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 7,69 |
*prijsindicatie
- RS-stocknr.:
- 260-0869
- Fabrikantnummer:
- 6204-C-2HRS>V
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 20mm | |
| Outside Diameter | 47mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 6.6kN | |
| Dynamic Load Rating | 14.7kN | |
| Series | Generation C | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Limiting Speed | 14500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 20mm | ||
Outside Diameter 47mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 6.6kN | ||
Dynamic Load Rating 14.7kN | ||
Series Generation C | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Limiting Speed 14500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
Vrijgesteld
Schaeffler Generation C Series Ball Bearing, 20mm Inside Diameter, 47mm Outside Diameter - 6204-C-2HRS >V
This ball bearing is a single-row deep-groove bearing designed for rotational support in mechanical and electromechanical assemblies. It is intended for applications requiring sealed protection, a cylindrical bore, and Compact form to accommodate shafts where radial load capacity and smooth high-speed operation are priorities.
Features & Benefits
• 14.7kN dynamic load rating delivers sustained radial load handling
• 6.6kN static load rating resists permanent deformation under Peak loads
• 14,500r/min limiting speed supports high-speed rotating equipment
• Steel sheet-metal cage reduces centrifugal distortion at speed
• 6.6kN static load rating resists permanent deformation under Peak loads
• 14,500r/min limiting speed supports high-speed rotating equipment
• Steel sheet-metal cage reduces centrifugal distortion at speed
**Applications**
• Suitable for precision motor shafts in automation equipment
• Ideal for small gearboxes in industrial drives
• Used for spindle support in Compact electrical actuators
• Can be used for bearing seats in control systems and robotics
• Ideal for small gearboxes in industrial drives
• Used for spindle support in Compact electrical actuators
• Can be used for bearing seats in control systems and robotics
What temperature range can it operate within?
The bearing functions between -20°C to 100°C, permitting use across typical industrial thermal environments.
What mounting shoulder and fillet considerations apply?
The minimum shaft-shoulder diameter required is 25.6mm, housing-shoulder maximum is 41.4mm, and maximum fillet radius on mating components is 1mm.
How Compact is the outer ring running diameter for housing fitment?
The outer ring calibre diameter for locating in the housing is 41.4mm, enabling precise seating in standard housings.
What are the mass and fatigue limit relevant to dynamic calculations?
The component mass is 0.102kg and the radial fatigue limit is 455N for life-estimation and durability assessments.
Gerelateerde Links
- FAG 6204-C-2HRS 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6004-C-2HRS 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG 6204-C-2Z 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6303-C-2HRS 1 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG 6005-C-2HRS 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- FAG 6204-C-2Z-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD