FAG 6203-C-2HRS>V 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- RS-stocknr.:
- 260-0875
- Fabrikantnummer:
- 6203-C-2HRS>V
- Fabrikant:
- FAG
Subtotaal (1 eenheid)*
€ 6,78
(excl. BTW)
€ 8,20
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 139 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 6,78 |
*prijsindicatie
- RS-stocknr.:
- 260-0875
- Fabrikantnummer:
- 6203-C-2HRS>V
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 40mm | |
| Race Width | 12mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 4.75kN | |
| Dynamic Load Rating | 11kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | Generation C | |
| Limiting Speed | 16900rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 40mm | ||
Race Width 12mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 4.75kN | ||
Dynamic Load Rating 11kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series Generation C | ||
Limiting Speed 16900rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
Vrijgesteld
- Land van herkomst:
- PT
Schaeffler Generation C Series Ball Bearing, 17mm Inside Diameter, 40mm Outside Diameter - 6203-C-2HRS >V
This ball bearing is a sealed, single‑row deep‑groove component designed to support radial loads in rotating assemblies within automation, electronics and mechanical systems. It is built for Compact installations where a closed‑end bearing with steel cage is required and operates across a moderate temperature range for general industrial environments.
Features & Benefits
• 11 kN dynamic load capacity for sustained radial loads
• 4.75 kN static load capacity for standing or shock loads
• Limiting speed 16,900 r/min for high‑speed rotating equipment
• Steel cage construction for dimensional stability under load
• 4.75 kN static load capacity for standing or shock loads
• Limiting speed 16,900 r/min for high‑speed rotating equipment
• Steel cage construction for dimensional stability under load
**Applications**
• Suitable for spindle use in Compact motor assemblies
• Ideal for conveyors and rotary indexing devices
• Used for small electric motors in automation systems
• Can be used in gearboxes requiring sealed radial bearings
• Ideal for conveyors and rotary indexing devices
• Used for small electric motors in automation systems
• Can be used in gearboxes requiring sealed radial bearings
What shaft and housing shoulder constraints should I allow for?
Minimum shaft shoulder diameter for full seating is 21.2mm and the maximum housing shoulder diameter is 35.8mm to ensure correct axial location.
What operating temperatures can be expected during use?
The bearing functions between −20°C to 100°C, accommodating typical workshop to light industrial ambient conditions.
How does the bearing handle surface fillets during installation?
Maximum permissible fillet radius at mating shoulders is 0.6mm while the minimum chamfer on mating faces should be 0.6mm to prevent contact with ring edges.
What mass should I account for when calculating rotating inertia?
Individual unit mass is 0.065kg for dynamic balancing and inertia considerations.
Are there recommended ring calibres to check for proper fit?
Outer ring calibre is 34.8mm and inner ring calibre is 22.8mm to verify seating dimensions during assembly.
Gerelateerde Links
- FAG 6203-C-2HRS 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2HRS-C3 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2Z 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2Z>V 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2Z-C3 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6303-C-2HRS 1 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG 6303-C-2HRS-C3 1 Row Ball Bearing - 17 mm ID, 47 mm OD
- INA 6203-C 1 Row Ball Bearing - 17 mm ID, 40 mm OD