FAG 6000-C-2HRS-C3>V 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- RS-stocknr.:
- 260-0880
- Fabrikantnummer:
- 6000-C-2HRS-C3>V
- Fabrikant:
- FAG
Subtotaal (1 verpakking van 10 eenheden)*
€ 57,94
(excl. BTW)
€ 70,11
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 20 stuk(s) klaar voor verzending
- 70 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 5,794 | € 57,94 |
*prijsindicatie
- RS-stocknr.:
- 260-0880
- Fabrikantnummer:
- 6000-C-2HRS-C3>V
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 10mm | |
| Outside Diameter | 26mm | |
| Race Width | 8mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.97kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 5.3kN | |
| Standards/Approvals | No | |
| Series | Generation C | |
| Bore Type | Parallel | |
| Limiting Speed | 28500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 10mm | ||
Outside Diameter 26mm | ||
Race Width 8mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 1.97kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 5.3kN | ||
Standards/Approvals No | ||
Series Generation C | ||
Bore Type Parallel | ||
Limiting Speed 28500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
- Land van herkomst:
- PT
Schaeffler Generation C Series Ball Bearing, 10mm Inside Diameter, 26mm Outside Diameter - 6000-C-2HRS-C3 >V
This ball bearing is a sealed, single-row deep-groove unit designed to support radial loads in compact, high-speed assemblies. It is intended for applications where a closed-end configuration and small form factor are required, operating across a typical industrial temperature span and suited to precision rotating components in automation and electronics contexts.
Features & Benefits
• High permissible speed 28,500 r/min enabling Rapid spindle rotation
• Dynamic load capacity 5.3 kN sustaining cyclic radial stresses
• Static load rating 1.97 kN resisting shock and standstill loads
• Steel-sheet cage reduces inertia for Faster response
• C3 internal clearance accommodates thermal expansion
• Sealed ends protect internal components from contamination
• Dynamic load capacity 5.3 kN sustaining cyclic radial stresses
• Static load rating 1.97 kN resisting shock and standstill loads
• Steel-sheet cage reduces inertia for Faster response
• C3 internal clearance accommodates thermal expansion
• Sealed ends protect internal components from contamination
**Applications**
• Suitable for miniature motor shafts in automation drives
• Ideal for precision fans and blowers in electronics cooling
• Used with rotary encoders and small servomotors
• Can be used for gearbox idler shafts in Compact machinery
• Used for medical device rotary joints requiring sealed bearings
• Ideal for precision fans and blowers in electronics cooling
• Used with rotary encoders and small servomotors
• Can be used for gearbox idler shafts in Compact machinery
• Used for medical device rotary joints requiring sealed bearings
What shaft and housing features are necessary for correct mounting?
The inner ring requires a 10 mm bore seating
ensure the shaft shoulder diameter and housing shoulder clearances meet the minimum and maximum fillet and shoulder dimensions to avoid ring interference.
How does temperature affect operating performance?
The bearing functions reliably from −20 °C to 100 °C
above this range material properties and clearance can alter, so avoid sustained operation outside these limits.
What maintenance considerations apply for sealed miniature bearings?
Sealed units are pre-lubricated and generally maintenance-free
monitor for vibration or noise that indicates contamination or end-of-life rather than routine lubrication needs.
How should users interpret fatigue limit and calculation factor for life predictions?
Use the provided fatigue load limit and the calculation factor in standard bearing life formulas to estimate service life under specific load/speed conditions for system design.
Gerelateerde Links
- FAG 6000-C-2HRS>V 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- FAG 629-C-2HRS-C3>V 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- FAG 6000-C-2Z-C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- FAG 6306-C-2HRS-C3 1 Row Ball Bearing - 30 mm ID, 72 mm OD
- FAG 6305-C-2HRS-C3 1 Row Ball Bearing - 25 mm ID, 62 mm OD
- FAG 6307-C-2HRS-C3 1 Row Ball Bearing - 35 mm ID, 80 mm OD
- FAG 6004-C-2HRS-C3 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG 6209-C-2HRS-C3 1 Row Ball Bearing - 45 mm ID, 85 mm OD