SKF 2200 E-2RS1TN9 10 mm ID 2 Row Ball Bearing -, 30 mm OD
- RS-stocknr.:
- 285-1349
- Fabrikantnummer:
- 2200 E-2RS1TN9
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 41,80
(excl. BTW)
€ 50,58
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 136 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 41,80 |
| 5 - 9 | € 40,15 |
| 10 - 24 | € 39,30 |
| 25 + | € 38,47 |
*prijsindicatie
- RS-stocknr.:
- 285-1349
- Fabrikantnummer:
- 2200 E-2RS1TN9
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 10mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 30mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| Number of Rows | 2 | |
| Static Load Rating | 1.18kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 5.53kN | |
| Series | 2200 | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 17000rpm | |
| Bearing Type | Self-Aligning | |
| Race Type | Plain | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 10mm | ||
Product Type Ball Bearing | ||
Outside Diameter 30mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
Number of Rows 2 | ||
Static Load Rating 1.18kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 5.53kN | ||
Series 2200 | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 17000rpm | ||
Bearing Type Self-Aligning | ||
Race Type Plain | ||
Vrijgesteld
SKF Self Aligning Ball Bearing, Plain Race Type, 10 mm ID - 2200 E-2RS1TN9
This ball bearing from SKF generates very little friction, making it an ideal option for high-speed operations. As it's a self-aligning bearing, it can accommodate misalignment and shaft deflections without these affecting performance. The bearing comes with contact seals on both sides to protect it from dirt and grease, and to extend its life. As it comes pre-greased, it doesn't need much maintenance. The cage of this ball bearing is made from fibreglass-reinforced polyamide, which is an extremely tough material. This makes it well-suited to handling heavy loads.
• Parallel cage type
• Dynamic load rating of 5.53 kN
• Static load rating of 1.18 kN
• Sealed end type
• Two rows
• Plain race type
• Inner diameter of 10 mm
• Outer diameter of 30 mm
• Width of 14 mm
Application Information
• Textile industry, such as yarn spindles
• Machinery industry
• Agriculture
What kind of seal is used on this self-aligning ball bearing?
This bearing uses quality, steel-reinforced NBR (nitrile rubber) sealing that's oil-resistant and non-wearing. The bearing is sealed for life and shouldn't be heated above +80°C before mounting.
Gerelateerde Links
- SKF 2206 E-2RS1TN9/C3 30 mm ID 2 Row Ball Bearing -, 62 mm OD
- SKF 2206 E-2RS1TN9 30 mm ID 2 Row Self-Aligning Ball Bearing -, 62 mm OD
- SKF 2306 E-2RS1TN9 30 mm ID 2 Row Self-Aligning Ball Bearing -, 72 mm OD
- SKF 2202 E-2RS1TN9 15 mm ID 2 Row Ball Bearing -, 35 mm OD
- SKF 2201 E-2RS1TN9 12 mm ID 2 Row Ball Bearing -, 32 mm OD
- SKF 2203 E-2RS1TN9 17 mm ID 2 Row Ball Bearing -, 40 mm OD
- SKF 2307 E-2RS1TN9 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- SKF 2304 E-2RS1TN9 20 mm ID 2 Row Ball Bearing -, 52 mm OD