SKF Deep Groove Ball Bearing - Shielded End Type, 20mm I.D, 47mm O.D
- RS-stocknr.:
- 667-1052
- Fabrikantnummer:
- 6204-2Z/C3
- Fabrikant:
- SKF
Bekijk alle Ball Bearings
29 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
142 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Each
€ 7,77
(excl. BTW)
€ 9,40
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 7,77 |
5 - 9 | € 7,45 |
10 - 24 | € 7,31 |
25 + | € 7,15 |
- RS-stocknr.:
- 667-1052
- Fabrikantnummer:
- 6204-2Z/C3
- Fabrikant:
- SKF
N.v.t.
Wetgeving en compliance
N.v.t.
Productomschrijving
SKF Deep-Groove Ball Bearing, 20mmID, 47mmOD - 6204-2Z/C3
Use this deep-groove ball bearing from SKF when you need to accommodate simultaneous radial and axial loads in your structures or equipment. The bearing is made up of an outer ring and an inner ring, with a single row of bearings in the raceway between them. When you install an axle or shaft through its central bore, it will support smooth rotational motion with a low friction coefficient. A deep-groove construction means the balls fit snugly into the raceway, for improved stability and minimal vibration.
Sealed end to prevent dust or small particles contaminating the workings, to ensure reliable performance
Limiting speed of 32,000 r/min (revolutions per minute) supports high-velocity applications
Dynamic load rating of 13.5kN to withstand substantial rotational force with minimal wear
Limiting speed of 32,000 r/min (revolutions per minute) supports high-velocity applications
Dynamic load rating of 13.5kN to withstand substantial rotational force with minimal wear
Applications
Medical equipment
Printing machinery
Industrial engines and pumps
Printing machinery
Industrial engines and pumps
What is this ball bearing made from?
This bearing is made from stainless steel, which offers a high level of durability and resistance to oxidation. This means that you can rely on it to perform over a long lifespan, with minimal maintenance required.
Specificaties
Kenmerk | Waarde |
Inside Diameter | 20mm |
Outside Diameter | 47mm |
Race Width | 14mm |
Ball Bearing Type | Deep Groove |
End Type | Shielded |
Number of Rows | 1 |
Static Load Rating | 6.55kN |
Material | Steel |
Cage Material | Steel |
Race Type | Plain |
Dynamic Load Rating | 13.5kN |
Bore Type | Parallel |