SKF E2.6305-2Z/C3 1 Row Deep Groove Ball Bearing - 25 mm ID, 62 mm OD
- RS-stocknr.:
- 719-2077
- Fabrikantnummer:
- E2.6305-2Z/C3
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 13,54
(excl. BTW)
€ 16,38
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 7 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 13,54 |
| 5 - 9 | € 13,17 |
| 10 - 24 | € 12,81 |
| 25 + | € 12,46 |
*prijsindicatie
- RS-stocknr.:
- 719-2077
- Fabrikantnummer:
- E2.6305-2Z/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 25mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 62mm | |
| Race Width | 17mm | |
| Cage Material | Non-Metallic | |
| Ball Material | Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 11.6kN | |
| Dynamic Load Rating | 22.9kN | |
| Standards/Approvals | No | |
| Series | E2 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 15000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 25mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 62mm | ||
Race Width 17mm | ||
Cage Material Non-Metallic | ||
Ball Material Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 11.6kN | ||
Dynamic Load Rating 22.9kN | ||
Standards/Approvals No | ||
Series E2 | ||
Bore Type Cylindrical | ||
Limiting Speed 15000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
SKF Series E2 Deep Groove Ball Bearing, 25mm Inside Diameter, 62mm Outside Diameter - E2.6305-2Z/C3
This deep-groove ball bearing is a sealed, single-row solution for rotary support in electrical and mechanical systems. It is designed to accommodate radial loads and moderate axial forces while maintaining smooth rotation at high speeds. The bearing is suited to precision-driven assemblies where controlled internal clearance and a shielded end configuration are required.
Features and Benefits:
• Shielded ends reduce contamination ingress during operation
• Non-metallic cage lowers friction and supports quieter running
• C3 internal clearance compensates for thermal expansion at speed
• Dynamic load capacity 22.9 kN supports sustained radial loading
• Static load capacity 11.6 kN resists deformation under static loads
• Limiting speed 15,000 r/min enables high-speed rotating equipment
• Non-metallic cage lowers friction and supports quieter running
• C3 internal clearance compensates for thermal expansion at speed
• Dynamic load capacity 22.9 kN supports sustained radial loading
• Static load capacity 11.6 kN resists deformation under static loads
• Limiting speed 15,000 r/min enables high-speed rotating equipment
Applications
• Suitable for sealed bearing requirements in electric motors
• Ideal for high-speed spindles in automation equipment
• Used with precision fans and blowers in electronics cooling
• Can be used for rotary shafts in small gearboxes
• Suitable for electromechanical actuators and drives
• Ideal for high-speed spindles in automation equipment
• Used with precision fans and blowers in electronics cooling
• Can be used for rotary shafts in small gearboxes
• Suitable for electromechanical actuators and drives
What material are the rolling elements MADE from?
The bearing uses steel balls to deliver wear resistance and consistent contact geometry.
How is the bore configured for shaft mounting?
It has a cylindrical bore suited to plain shaft fits and standard press or slip-fit installation.
What cage construction is employed and why?
A non-metallic cage is used to reduce internal friction and lower operational noise.
How does the bearing handle axial displacement?
The single-row deep-groove design allows limited axial load support in both directions while primarily carrying radial loads.
Gerelateerde Links
- FAG 6305-C-2Z-C3 1 Row Deep Groove Ball Bearing - 25 mm ID, 62 mm OD
- SKF 6017-2Z/C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 130 mm OD
- SKF E2.6207-2Z/C3 1 Row Deep Groove Ball Bearing - 35 mm ID, 72 mm OD
- SKF E2.6306-2Z/C3 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- SKF E2.6307-2Z/C3 1 Row Deep Groove Ball Bearing - 35 mm ID, 80 mm OD
- SKF 6021-2Z/C3 1 Row Deep Groove Ball Bearing - 105 mm ID, 160 mm OD
- SKF 6019-2Z/C3 1 Row Deep Groove Ball Bearing - 95 mm ID, 145 mm OD
- SKF 627-2Z/C3 1 Row Deep Groove Ball Bearing - 7 mm ID, 22 mm OD