SKF W 61901-2RS1 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- RS-stocknr.:
- 893-0331
- Fabrikantnummer:
- W 61901-2RS1
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 43,65
(excl. BTW)
€ 52,82
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 85 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 43,65 |
| 5 - 9 | € 41,90 |
| 10 - 24 | € 41,03 |
| 25 + | € 40,16 |
*prijsindicatie
- RS-stocknr.:
- 893-0331
- Fabrikantnummer:
- W 61901-2RS1
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 12mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 24mm | |
| Race Width | 6mm | |
| Race Material | Stainless Steel | |
| Cage Material | Sheet Metal | |
| Ball Material | Stainless Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.46kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 2.51kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 1 Extra Light Thrust | |
| Limiting Speed | 19000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 12mm | ||
Product Type Ball Bearing | ||
Outside Diameter 24mm | ||
Race Width 6mm | ||
Race Material Stainless Steel | ||
Cage Material Sheet Metal | ||
Ball Material Stainless Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 1.46kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 2.51kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 1 Extra Light Thrust | ||
Limiting Speed 19000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
- Land van herkomst:
- JP
SKF Single-Row Deep-Groove Ball Bearing, 12mm ID, 24mm OD - W61901-2RS1
Achieve higher levels of energy efficiency and reliability with this deep-groove ball bearing from SKF. It's manufactured from high-grade stainless steel for superior resistance to corrosion and abrasive chemicals. The bearing is capable of withstanding frequent washdowns, making it suitable to use in food processing applications. It's sealed on both ends to prevent grease contamination and incorporates a food-grade lubricant. You can use this unit to accommodate both radial and axial loads in either direction.
• Nitrile rubber seals with good resistance to oils for an extended service life
• Produces very little heat in operation to improve overall efficiency and productivity of machinery
• Quieter operation, thanks to low levels of vibration
• Optimised geometry for superior precision and reliability
Applications
• Pulp and paper mills
• Conveyor belts and assembly lines
• Automotive gearboxes
Why are a bearing's rings usually made from hardened steel?
A bearing's rings play an important role in dealing with pressure at the rolling contact area. To cope with this fatigue, the rings are made of hardened steel to extend the service life of the bearing. Depending on specific requirements, SKF uses stainless steels or high-temperature steels in the manufacturing of its bearing rings.
Gerelateerde Links
- SKF 61901-2RS1 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- SKF 61901 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- SKF 61901-2Z 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- SKF W 61901-2Z 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- FAG 61901-2Z-HLC 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- INA 61901-2RSR-HLC 1 Row Ball Bearing - 12 mm ID, 24 mm OD
- FAG 61901-HLC 1 Row Deep Groove Ball Bearing - 12 mm ID, 24 mm OD
- SKF 61802-2RS1 1 Row Ball Bearing - 15 mm ID, 24 mm OD