RS PRO AAA Battery Holder Coil Spring
- RS-stocknr.:
- 512-3552
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 1,50
(excl. BTW)
€ 1,82
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1.572 stuk(s) klaar voor verzending
- 12.652 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1,50 |
*prijsindicatie
- RS-stocknr.:
- 512-3552
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Battery Holder | |
| Compatible Battery Size | AAA | |
| Sub Type | Battery Holder | |
| Number of Cells | 2 | |
| Mount Type | Chassis | |
| Body Material | Polypropylene | |
| Termination Type | Coil Spring | |
| Standards/Approvals | No | |
| Series | SN | |
| Length | 52.3mm | |
| Height | 13mm | |
| Diameter | 10.1mm | |
| Width | 24.7mm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Battery Holder | ||
Compatible Battery Size AAA | ||
Sub Type Battery Holder | ||
Number of Cells 2 | ||
Mount Type Chassis | ||
Body Material Polypropylene | ||
Termination Type Coil Spring | ||
Standards/Approvals No | ||
Series SN | ||
Length 52.3mm | ||
Height 13mm | ||
Diameter 10.1mm | ||
Width 24.7mm | ||
- Land van herkomst:
- TW
RS PRO AAA Battery Holder, Coil Spring Contact
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
Features and Benefits
• Holds 2 x AAA batteries
• Chassis mount
• Three mounting holes
• Dimensions 52.3 mm x 24.7 mm x 13 mm
• Maximum operating temperature of 82°C
• Coil spring terminal contact type
• Body material of polypropylene (PP)
• Black in colour
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Gerelateerde Links
- RS PRO AAA Battery Holder Coil Spring
- Keystone AAA Battery Holder Coil Spring
- RS PRO AAA Battery Holder Spring
- RS PRO 2 x AAA Battery Holder Leaf Spring
- RS PRO 1/2 AA Battery Holder Coil Spring
- RS PRO 9 V PP3 Battery Holder Coil Spring
- RS PRO D Battery Holder Coil Spring
- Bulgin AAA Battery Holder Leaf Spring