STMicroelectronics, Battery Charge Controller IC, 2.7 V to 5.5V Input 2.5 A, DFN 8-Pin
- RS-stocknr.:
- 196-2009P
- Fabrikantnummer:
- STC3100IQT
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 96,90
(excl. BTW)
€ 117,25
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 8.895 stuk(s) vanaf 17 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 245 | € 1,938 |
| 250 - 495 | € 1,892 |
| 500 + | € 1,796 |
*prijsindicatie
- RS-stocknr.:
- 196-2009P
- Fabrikantnummer:
- STC3100IQT
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Sub Type | Battery Charge Controller IC | |
| Product Type | Battery Charge Controller IC | |
| Mount Type | Surface | |
| Package Type | DFN | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 2.7V | |
| Output Current | 2.5A | |
| Maximum Supply Voltage | 5.5V | |
| Maximum Operating Temperature | 85°C | |
| Length | 3.15mm | |
| Minimum Operating Temperature | -40°C | |
| Height | 0.95mm | |
| Standards/Approvals | No | |
| Series | STC3100 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Sub Type Battery Charge Controller IC | ||
Product Type Battery Charge Controller IC | ||
Mount Type Surface | ||
Package Type DFN | ||
Pin Count 8 | ||
Minimum Supply Voltage 2.7V | ||
Output Current 2.5A | ||
Maximum Supply Voltage 5.5V | ||
Maximum Operating Temperature 85°C | ||
Length 3.15mm | ||
Minimum Operating Temperature -40°C | ||
Height 0.95mm | ||
Standards/Approvals No | ||
Series STC3100 | ||
Automotive Standard No | ||
The STC3100 monitors the critical parameters of a single-cell Li-Ion battery (voltage, temperature and current) and includes hardware functions to implement a gas gauge for battery charge monitoring, based on a programmable 12- to 14-bit A/D converter. With a typical 30 milliOhms external sense resistor, the battery current can be up to 2.5 A and the accumulator system provides a capacity up to +/-7000 mAh with a resolution of 0.2 mAh.
8-byte unique device ID
32-RAM bytes
Battery voltage monitoring
Coulomb counter with 12/14-bit AD converter, +/- 80 mV input voltage range
Internal temperature sensor
I2C interface for gas gauge monitoring and device control
One general-purpose I/O
Internal or external 32768 Hz time base