onsemi, Battery Charger IC 21 V Input 3.3 V Output 10 mA, TSSOP-16 16-Pin

Bekijk alle Battery Management

Subtotaal (1 rol van 2500 eenheden)*

€ 1.195,00

(excl. BTW)

€ 1.445,00

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2.500 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per rol*
2500 +€ 0,478€ 1.195,00

*prijsindicatie

RS-stocknr.:
284-9045
Fabrikantnummer:
NCS35011DTBR2G
Fabrikant:
onsemi
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

onsemi

Sub Type

Multi-Cell Lithium-Ion Battery Monitor

Product Type

Battery Charger IC

Mount Type

Solder

Package Type

TSSOP-16

Pin Count

16

Output Current

10mA

Maximum Supply Voltage

21V

Maximum Operating Temperature

85°C

Height

1mm

Standards/Approvals

RoHS, REACH

Length

5mm

Series

NCS35011

Minimum Operating Temperature

-40°C

Automotive Standard

No

The ON Semiconductor ultra low power protection integrated circuit managing lithium-ion batteries from 3 to 5 cells in series with accurate battery voltage indication up to 5 LED outputs. Each cell in the battery pack is monitored for an over-voltage and under-voltage condition. Upon detecting an over-voltage, the ODI pin will assert indicating a fault condition and stay asserted until the fault is cleared. During an under voltage condition, the UDI pin will also assert indicating the fault but will have a pulse width that is pre−set in the protector. Both over and under voltage detections have a hard coded pre-set delay time before fault indication.

Over voltage and under voltage detection

Protection for 3, 4 and 5 series cells

High accuracy voltage measurement ±5 mV

These devices are Pb free and are RoHS compliant

Gerelateerde Links