INA Bearing Insert 30 mm ID 62 mm OD GRAE30-XL-NPP-B

Bekijk alle Bearing Inserts
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 38,18

(excl. BTW)

€ 46,20

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 52 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 4€ 38,18
5 - 9€ 36,68
10 - 24€ 35,89
25 +€ 35,12

*prijsindicatie

RS-stocknr.:
137-1811
Fabrikantnummer:
GRAE30-XL-NPP-B
Fabrikant:
INA
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

INA

Product Type

Bearing Insert

Inside Diameter

30 mm

Outside Diameter

62 mm

Material

Steel

Static Load Rating

11.3kN

Dynamic Load Rating

20.7kN

End Type

Sealed

Bore Type

Parallel

Standards/Approvals

No

Radial Insert Ball Bearings with Eccentric Locking Collar


INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.;The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.

Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.;To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.;In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)

Features and Benefits


• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Protected against fretting corrosion;• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B);• Shaft diameters from 20 mm to 30 mm (RALE..NPP);• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)

Suffixes


FA106 - Bearing subjected to special noise testing;B - Bearing with special outer ring;NPP - Lip seals on both sides (P type seal);KRR - Lip seals on both sides (R type seal)

INA


Gerelateerde Links