INA Bearing Insert 30 mm ID 62 mm OD GLE30-XL-KRR-B
- RS-stocknr.:
- 194-6882
- Fabrikantnummer:
- GLE30-XL-KRR-B
- Fabrikant:
- INA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 61,74
(excl. BTW)
€ 74,71
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 16 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 61,74 |
| 5 - 9 | € 58,09 |
| 10 - 24 | € 56,94 |
| 25 + | € 55,69 |
*prijsindicatie
- RS-stocknr.:
- 194-6882
- Fabrikantnummer:
- GLE30-XL-KRR-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Inside Diameter | 30 mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 62 mm | |
| Static Load Rating | 20.7kN | |
| Dynamic Load Rating | 11.3kN | |
| Standards/Approvals | No | |
| Bore Type | Round | |
| Overall Width | 36.5mm | |
| Series | GE | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Inside Diameter 30 mm | ||
Product Type Bearing Insert | ||
Outside Diameter 62 mm | ||
Static Load Rating 20.7kN | ||
Dynamic Load Rating 11.3kN | ||
Standards/Approvals No | ||
Bore Type Round | ||
Overall Width 36.5mm | ||
Series GE | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Inserts 30mm ID 62mm OD GE30-XL-KRR-B
- INA Bearing Inserts 30mm ID 62mm OD GYE30-XL-KRR-B
- INA Bearing Inserts 30mm ID 62mm OD GYE30-KRR-B-VA-HLA
- INA Bearing Inserts 30mm ID 62mm OD 206-XL-NPP-B
- INA Bearing Inserts 30mm ID 62mm OD GE30-XL-KTT-B
- INA Bearing Inserts 30mm ID 62mm OD GAY30-XL-NPP-B
- INA Bearing Inserts 30mm ID 62mm OD GSH30-XL-2RSR-B
- INA Bearing Inserts 30mm ID 62mm OD RAE30-XL-NPP-B