INA Bearing Insert 45 mm ID 85 mm OD GLE45-XL-KRR-B
- RS-stocknr.:
- 194-6885
- Fabrikantnummer:
- GLE45-XL-KRR-B
- Fabrikant:
- INA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 99,73
(excl. BTW)
€ 120,67
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 09 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 99,73 |
| 5 - 9 | € 93,84 |
| 10 - 24 | € 91,93 |
| 25 + | € 89,95 |
*prijsindicatie
- RS-stocknr.:
- 194-6885
- Fabrikantnummer:
- GLE45-XL-KRR-B
- Fabrikant:
- INA
Datasheets
Wetgeving en compliance
Productomschrijving
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Unit Insert 45 mm ID 85 mm OD GE45-XL-KRR-B
- INA Bearing Unit Insert 45 mm ID 85 mm OD GYE45-XL-KRR-B
- INA Bearing Insert 60 mm ID 130 mm OD GNE60-XL-KRR-B
- INA Bearing Insert 70 mm ID 125 mm OD GE70-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GE30-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GE25-XL-KRR-B
- INA Bearing Insert 90 mm ID 160 mm OD GE90-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GYE25-XL-KRR-B