INA Bearing Insert 12 mm ID 40 mm OD GRAE12-XL-NPP-B
- RS-stocknr.:
- 194-6887
- Fabrikantnummer:
- GRAE12-XL-NPP-B
- Fabrikant:
- INA
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 27,14
(excl. BTW)
€ 32,84
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 12 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 27,14 |
| 5 - 9 | € 25,52 |
| 10 - 24 | € 25,03 |
| 25 + | € 24,48 |
*prijsindicatie
- RS-stocknr.:
- 194-6887
- Fabrikantnummer:
- GRAE12-XL-NPP-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Inside Diameter | 12 mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 40 mm | |
| Static Load Rating | 10.1kN | |
| Dynamic Load Rating | 4.75kN | |
| Series | GE | |
| Standards/Approvals | No | |
| Overall Width | 28.6mm | |
| Bore Type | Round | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Inside Diameter 12 mm | ||
Product Type Bearing Insert | ||
Outside Diameter 40 mm | ||
Static Load Rating 10.1kN | ||
Dynamic Load Rating 4.75kN | ||
Series GE | ||
Standards/Approvals No | ||
Overall Width 28.6mm | ||
Bore Type Round | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Inserts 15mm ID 40mm OD GRAE15-XL-NPP-B
- INA Bearing Inserts 17mm ID 40mm OD GRAE17-XL-NPP-B
- INA Bearing Inserts 40mm ID 80mm OD RAE40-XL-NPP-B
- INA Bearing Inserts 40mm ID 80mm OD GAY40-XL-NPP-B
- INA Bearing Inserts 40mm ID 80mm OD GRAE40-XL-NPP-B
- INA Bearing Inserts 40mm ID 80mm OD 208-XL-NPP-B
- INA Bearing Unit Insert 12mm ID 40mm OD RAE12-XL-NPP-FA106
- INA Bearing Inserts 40mm ID 80mm OD RAE40-XL-NPP-FA106