SKF Hydraulic Bearing Puller, 11.2 t Force, 100 kN (11.2 US ton force), 17-Piece
- RS-stocknr.:
- 190-601
- Fabrikantnummer:
- TMHC 110E
- Fabrikant:
- SKF
Subtotaal (1 kit)*
€ 1.314,21
(excl. BTW)
€ 1.590,19
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Kit(s) | Per set |
|---|---|
| 1 + | € 1.314,21 |
*prijsindicatie
- RS-stocknr.:
- 190-601
- Fabrikantnummer:
- TMHC 110E
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Puller | |
| Operation | Hydraulic | |
| Hydraulic Force | 11.2t | |
| Number of Pieces | 17 | |
| Bearing Puller Capacity | 100 kN (11.2 US ton force) | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Puller | ||
Operation Hydraulic | ||
Hydraulic Force 11.2t | ||
Number of Pieces 17 | ||
Bearing Puller Capacity 100 kN (11.2 US ton force) | ||
Standards/Approvals No | ||
- Land van herkomst:
- TW
SKF Bearing Puller, 17-Piece Kit, 80mm Maximum Stroke - TMHC 110E
Need a hand with the removal of tight-fitted bearings on your industrial equipment? Choose this bearing puller kit from SKF. The 17-piece set contains an advanced hydraulic spindle that delivers up to 100kN of force, making it a practical choice for your heavy-duty applications. You'll also find an assembly stand that's versatile enough to let you choose between a two-arm or three-arm hold on your bearing, depending on how much room is available on your equipment. The kit comes complete with rods, extension pieces and fastening units, so you get all you'll need for simple and safe bearing removal.
Features & Benefits
• Cylinder has a service life of 5000 cycles, making it suitable for long-term use
• Kit comes with a jaw puller and strong back puller to handle hard-to-reach bearings
• Can be used for shaft diameters between 20 and 100mm, so it's a versatile workmate
• Extension rods allow for quick adjustment to longer pulling settings up to 245mm
Applications
• Aerospace engineering
• Marine industry
• Process and packaging plants
What's the job of the safety valve on the hydraulic spindle?
The safety valve on this kit's spindle limits the applied force to 100kN. This prevents puller overload that may damage your bearings or equipment.
Gerelateerde Links
- SCHAEFFLER Hydraulic Bearing Puller 3-Piece
- SKF Hydraulic Bearing Puller 8-Piece
- SKF Hydraulic Bearing Puller 1-Piece
- SKF Hydraulic Bearing Puller 36 to 150 mm
- SKF Hydraulic Bearing Puller 60 KN, 1-Piece
- SKF Hydraulic Bearing Puller 325 KN, 1-Piece
- SKF Hydraulic Bearing Puller 150 KN, 1-Piece
- SKF Hydraulic Bearing Puller 500 KN, 2-Piece